MIC2172YM-TR
Voltage Regulators - DC DC Switching Regulators
Technical Specifications
| Type | Description |
|---|---|
| Output Type | Adjustable |
| Output Voltage | 33.12 V |
| Output Current | 1.25 A |
| Function | Boost |
| Working Voltage V | 21.5 V |
| Switching Freq Hz | 100 kHz |
| Channels | 1 |
| Type | Description |
|---|---|
| Iq A | 0.007 A |
| Switch tube (built-in/external) | Built-in |
| Operating Temp | -40°C ~ +85°C @(TA) |
| Features | Cycle-by-cycle current limiting;Frequency synchronization;Adjustable current limiting |
| Topology | Boost;Buck;Inverting;Cuk |
| Package / Case | SOIC-8 |
Product Introduction
The MIC2172 and MIC3172 are complete 100kHz SMPS current mode controllers with internal 65V 1.25A power switches. The MIC2172 features external frequency synchronization or frequency adjustment, while the MIC3172 features an enable/shutdown control input.
Although primarily intended for voltage step-up applications, the floating switch architecture of the MIC2172/3172 makes it practical for step-down, inverting, and Cuk configurations as well as isolated topologies.
Operating from 3V to 40V, the MIC2172/3172 draws only 7 mA of quiescent current, making it attractive for battery-operated supplies.
The MIC3172 is for applications that require on/off control of the regulator. The MIC3172 is externally shut down by applying a TTL-low signal to EN (enable). When disabled, the MIC3172 draws only leakage current (typically less than 1μA). EN must be high for normal operation. For applications not requiring control, EN must be tied to VIN or TTL high.
The MIC2172 is for applications that require two or more SMPS regulators that operate from the same input supply. The MIC2172 features a SYNC input that allows locking of its internal oscillator to an external reference. This makes it possible to avoid the audible beat frequencies that result from the unequal oscillator frequencies of independent SMPS regulators.
A reference signal can be supplied by one MIC2172 designated as a master. To ensure locking of the slave’s oscillators, the reference oscillator frequency must be higher than the slave. The master MIC2172’s oscillator frequency is increased up to 135kHz by connecting a resistor from SYNC to ground.
The MIC2172/3172 is available in an 8-pin plastic DIP or SOIC for -40°C to +85°C ambient temperature operation.
Features
- 1.25A, 65V Internal Switch Rating
- 3V to 40V Input Voltage Range
- Current Mode Operation
- Internal Cycle-by-Cycle Current Limit
- Low External Parts Count
- Operates in Most Switching Topologies
- 7 mA Quiescent Current (Operating)
- < μA Quiescent Current, Shutdown Mode (MIC3172)
- TTL Shutdown Compatibility (MIC3172)
- External Frequency Synchronization (MIC2172)
- External Frequency Trim (MIC2172)
- Fits Most LT1172 Sockets
Applications
- - Laptop/Palmtop Computers - Toys - Handheld Instruments - Off-Line Converter up to 50W (Requires External Power Switch) - Predriver for Higher Power Capability - Master/Slave Configurations (MIC2172)
Datasheet
Alternative Parts
Common MIC2172YM-TR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need MIC2172YM-TR from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
When you need MIC2172YM-TR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need MIC2172YM-TR? Send us your required quantity and specifications for a sourcing check and quotation.