MIC2104YML-TR
Power Management
Technical Specifications
| Type | Description |
|---|---|
| Output Type | Adjustable |
| Output Current | 15 A |
| Function | Step-down type |
| Channels | 1 |
| Quiescent Current | 2.1 mA |
| Synchronous Rectifier | Yes |
| Switch Tube (built-in/external) | External |
| Type | Description |
|---|---|
| Features | Adjustable current limiting;Hiccup current limiting;Built-in LDO regulator;Operating status indication;Overcurrent Protection |
| Topology | Buck |
| Supply Voltage | 4.5V~75V |
| Output Voltage | 800mV~24V |
| Operating Temperature | -40°C~+125°C |
| Switching Freq Hz | 200kHz~600kHz |
| Package / Case | WQFN-16-EP(3x3) |
Product Introduction
The MIC2103/4 are constant-frequency, synchronous buck controllers that feature a unique adaptive ON-time control architecture. The MIC2103/4 operates over an input supply range from 4.5V to 75V and can be used to supply up to 15A of output current. The output voltage is adjustable down to 0.8V with a guaranteed accuracy of ±1%. The device operates with programmable switching frequency from 200 kHz to 600 kHz.
The HyperLight Load architecture provides the same high-efficiency and ultra-fast transient response as the Hyper Speed Control architecture under medium to heavy loads, but also maintains high efficiency under light load conditions by transitioning to variable frequency, discontinuous-mode operation.
The MIC2103/4 offers a full suite of protection features to ensure protection of the IC during fault conditions. These include undervoltage lockout to ensure proper operation under power-sag conditions, internal soft-start to reduce inrush current, fold-back current-limit, “hiccup” mode short-circuit protection, and thermal shutdown.
Features
- Hyper Speed Control Architecture Enables:
- High Delta V Operation (VIN = 75V and VOUT = 1.2V)
- Any Capacitor Stable
- 4.5V to 75V Input Voltage
- Adjustable Output Voltage from 0.8V to 24V (Also Limited by Duty Cycle)
- 200 kHz to 600 kHz Programmable Switching Frequency
- HyperLight Load Control (MIC2103 Only)
- Hyper Speed Control (MIC2104 Only)
- Enable Input, Power-Good Output
- Built-In 5V Regulator for Single-Supply Operation
- Programmable Current-Limit and Fold-Back “Hiccup” Mode Short-Circuit Protection
- 5 ms Internal Soft-Start, Internal Compensation, and Thermal Shutdown
- Supports Safe Start-Up into a Pre-Biased Output
- 40℃ to +125℃ Junction Temperature Range
- Available in 16-Pin 3 mm x 3 mm QFN Package
Applications
- Distributed Power Systems
- Networking/Telecom Infrastructure
- Printers, Scanners, Graphic Cards, and Video Cards
Datasheet
Alternative Parts
Common MIC2104YML-TR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing MIC2104YML-TR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need MIC2104YML-TR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need MIC2104YML-TR? Send us your required quantity and specifications for a sourcing check and quotation.