MIC2039BYM6-TR
Power Distribution Switches, Load Drivers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 4 V |
| number of channels | 1 |
| Control Input Logic | Active High |
| Maximum Continuous Current | 2.5A |
| Operating Temp | -40°C ~ +125°C |
| Type | Description |
|---|---|
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Under-voltage lockout;Soft-start |
| Rds On Ohm | 0.075 Ω |
| Type | High Side Switch |
| Package / Case | SOT-23-6 |
Product Introduction
The MIC2039 is a high-side MOSFET power distribution switch that provides increased system reliability by using 5% current-limit accuracy.
The MIC2039 has an operating input voltage range from 2.5V to 5.5V, is internally current-limited, and has thermal shutdown to protect the device and system. The MIC2039 is offered with either active-high or active-low logic level enable input controls. It has an open drain fault status output flag with a built-in 32 ms delay that asserts low during overcurrent or thermal-shutdown conditions.
The MIC2039 features an adjustable output current limit that is resistor-programmable from 0.2A to 2.5A. The MIC2039 also offers a unique, kickstart feature that allows momentary high-current surges up to the secondary current limit (ILIMIT_2nd) during startup or while operating in steady-state. This is useful for charging loads with high inrush currents, such as capacitors. After an overcurrent condition is established, these switches enter into a constant current-limit mode unless the die temperature exceeds the thermal-shutdown specification.
The MIC2039 is available in 6-pin SOT-23 and 6-pin 2mm×2mm thin DFN packages. The MIC2039 has an operating junction temperature range of -40°C to +125°C.
Features
- ±5% Current-Limit Accuracy
- Input Supply Range from 2.5V to 5.5V
- Low Quiescent Current: 100µA Typical (Switch ON)
- 75mΩ Typical RDS(ON) at 5V
- 0.2A to 2.5A Adjustable Output Current
- Kickstart: Momentary Secondary Current-Limit Threshold (120 ms period)
- Soft-Start Functionality
- Undervoltage Lockout (UVLO)
- Fast 10 µs Short-Circuit Response Time (Non-Kickstart Options)
- Fault Status Output Flag
- Logic Controlled Enable (Active-High, Active-Low)
- Thermal Shutdown
- Pin Compatible with MIC2009/MIC2019
- 6-Pin 2mm×2mm Thin DFN and 6-Pin SOT-23 Packages
- Junction Temperature Range from -40°C to +125°C
Applications
- - USB Peripherals and USB 2.0/3.0-Compatible - DTV/STB - Notebooks and Consumer Electronics - General Purpose Power Distribution
Datasheet
Alternative Parts
Common MIC2039BYM6-TR alternatives overseas buyers search for:
- RS2583YH6 (request quote)
- LPW5213B6F (request quote)
- JW7111SSOTB#TRPBF (request quote)
- FP6861J-1S6 (request quote)
- AP22655QWU-7 (request quote)
- AP22655WU-7 (request quote)
- MIC2017YM6-TR (request quote)
- MIC2039AYM6-TR (request quote)
- NCT3527U-A TR (request quote)
- NCT3527U TR (request quote)
- MIC2018YM6-TR (request quote)
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Type | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
Sourcing Information
Need MIC2039BYM6-TR from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
For MIC2039BYM6-TR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need MIC2039BYM6-TR? Send us your required quantity and specifications for a sourcing check and quotation.