MCP6542T-I/MS
Amplifiers & Comparators
Technical Specifications
| Type | Description |
|---|---|
| Common Mode Rejection Ratio | 70 dB |
| Voffset V | 0.002 V |
| Rail To Rail | Rail-to-Rail Input, Rail-to-Rail Output |
| Input Offset Current(Ios) | 1pA |
| Output Mode | CMOS;TTL |
| Ib - Input Bias Current | 1pA |
| Input Hysteresis Voltage (Vhys) | 3.3mV |
| Quiescent Current(Iq) | 600nA |
| Maximum Power Supply Range (Vdd-Vss) | 7V |
| Type | Description |
|---|---|
| Response Time (tr) | 0.85us |
| Channels | 2 |
| Operating Temperature | -40°C~+85°C |
| Features | Built-in hysteresis |
| Voffset Drift Uv | 3 µV |
| Output Type | Push-pull |
| Tpd Ns | 4 ns |
| Single Supply | 1.6V~5.5V |
| Package / Case | MSOP-8 |
Product Introduction
The MCP6541/1R/1U/2/3/4 family of comparators is offered in single (MCP6541, MCP6541R, MCP6541U), single with Chip Select (CS) (MCP6543), dual (MCP6542) and quad (MCP6544) configurations. The outputs are push-pull (CMOS/TTL-compatible) and are capable of driving heavy DC or capacitive loads.
These comparators are optimized for low-power, single-supply operation with greater than rail-to-rail input operation. The push-pull output of the MCP6541/1R/1U/2/3/4 family supports rail-to-rail output swing and interfaces with TTL/CMOS logic. The internal input hysteresis eliminates output switching due to internal input noise voltage, reducing current draw. The output limits supply current surges and dynamic power consumption while switching. This product family operates with a single-supply voltage as low as 1.6V and draws less than 1 µA/comparator of quiescent current.
The related MCP6546/7/8/9 family of comparators has an open-drain output. Used with a pullup resistor, these devices can be used as level-shifters for any desired voltage up to 10V and in wired-OR logic.
Features
- Low Quiescent Current: 600 nA/Comparator (typ.)
- Rail-to-Rail Input: VSS - 0.3V to VDD + 0.3V
- CMOS/TTL-Compatible Output
- Propagation Delay: 4 µs (typical, 100 mV Overdrive)
- Wide Supply Voltage Range: 1.6V to 5.5V
- Available in Single, Dual and Quad
- Single Available in SOT-23-5, SC-70-5 Packages
- Chip Select (CS) with MCP6543
- Low Switching Current
- Internal Hysteresis: 3.3 mV (typ.)
- Temperature Ranges:
- Industrial: -40°C to +85°C
- Extended: -40°C to +125°C
Applications
- Laptop Computers
- Mobile Phones
- Metering Systems
- Hand-held Electronics
- RC Timers
- Alarm and Monitoring Circuits
- Windowed Comparators
- Multivibrators
Datasheet
Alternative Parts
Common MCP6542T-I/MS alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
Sourcing Information
Looking for a reliable source for MCP6542T-I/MS from Microchip Technology? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
When you need MCP6542T-I/MS, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need MCP6542T-I/MS? Send us your required quantity and specifications for a sourcing check and quotation.