MCP4921-E/SN
Digital to Analog Converters (DAC)
Technical Specifications
| Type | Description |
|---|---|
| Operating Temp | -40°C ~ +125°C |
| Working Voltage V | 4.1 V |
| Function | Programmable gain;Power-on reset;Power-down mode |
| Channels | 1.0 |
| Settling Time | 4.5us |
| Type | Description |
|---|---|
| Quiescent Current (Iq) | 175uA |
| Integral non - linearity | 4LSB |
| Resolution (Bits) | 12 |
| Interface Type | SPI |
| Package / Case | SOIC-8 |
Product Introduction
The MCP4901/4911/4921 devices are single channel 8-bit, 10-bit and 12-bit buffered voltage output Digital-to-Analog Converters (DACs), respectively. The devices operate from a single 2.7V to 5.5V supply with an SPI compatible Serial Peripheral Interface. The user can configure the full-scale range of the device to be VREF or 2*VREF by setting the gain selection option bit (gain of 1 of 2).
The user can shut down the device by setting the Configuration Register bit. In Shutdown mode, most of the internal circuits are turned off for power savings, and the output amplifier is configured to present a known high resistance output load [500 kΩ typical].
The devices include double-buffered registers, allowing synchronous updates of the DAC output using the LDAC pin. These devices also incorporate a Power-on Reset (POR) circuit to ensure reliable powerup.
The devices utilize a resistive string architecture, with its inherent advantages of low Differential Non-Linearity (DNL) error and fast settling time. These devices are specified over the extended temperature range (+125°C).
The devices provide high accuracy and low noise performance for consumer and industrial applications where calibration or compensation of signals (such as temperature, pressure and humidity) are required.
The MCP4901/4911/4921 devices are available in the PDIP, SOIC, MSOP and DFN packages.
Features
- MCP4901: 8-Bit Voltage Output DAC
- MCP4911: 10-Bit Voltage Output DAC
- MCP4921: 12-Bit Voltage Output DAC
- Rail-to-Rail Output
- SPI Interface with 20 MHz Clock Support
- Simultaneous Latching of the DAC Output with LDAC Pin
- Fast Settling Time of 4.5 μs
- Selectable Unity or 2x Gain Output
- External Voltage Reference Input
- External Multiplier Mode
- 2.7V to 5.5V Single-Supply Operation
- Extended Temperature Range: -40°C to +125°C
Applications
- - Set Point or Offset Trimming - Precision Selectable Voltage Reference - Motor Control Feedback Loop - Digitally-Controlled Multiplier/Divider - Calibration of Optical Communication Devices
Datasheet
Alternative Parts
Common MCP4921-E/SN alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing MCP4921-E/SN from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For MCP4921-E/SN, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Looking to source MCP4921-E/SN? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.