MCP3914A1T-E/MV
Energy Metering
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 13.667 MHz |
| Sampling Rate | 4MHz |
| Voltage Reference Value | 1.2V |
| Resolution(Bits) | 24 |
| S/N Ratio | 95dB |
| Operating Temp | -40°C ~ +125°C |
| Type | Description |
|---|---|
| Working Voltage V | 3.15 V |
| Iq A | 1e-08 |
| Channels | 8.0 |
| Function | Simultaneous sampling control;Programmable gain;Internal reference source;Digital calibration |
| Interface | SPI |
| Package / Case | UQFN-40-EP |
Product Introduction
The MCP3914 is a 3V eight-channel Analog Front End (AFE) containing eight synchronous sampling DeltaSigma Analog-to-Digital Converters (ADC), eight PGAs, phase delay compensation block, low-drift internal voltage reference, Digital Offset and Gain Error Calibration registers, and high-speed 20 MHz SPI compatible serial interface.
The MCP3914 ADCs are fully configurable with features such as: 16/24-bit resolution, Oversampling Ratio (OSR) from 32 to 4096, gain from 1x to 32x, independent shutdown and Reset, dithering and auto-zeroing. The communication is largely simplified with 8-bit commands, including various continuous Read/Write modes and 16/24/32-bit data formats that can be accessed by the Direct Memory Access (DMA) of an 8, 16 or 32-bit MCU, and with the separate Data Ready pin that can directly be connected to an Interrupt Request (IRQ) input of an MCU.
The MCP3914 includes advanced security features to secure the communications and the configuration settings, such as a CRC-16 checksum on both serial data outputs and static register map configuration. It also includes a register map lock through an 8-bit secure key to stop unwanted WRITE commands from processing.
The MCP3914 is capable of interfacing with a variety of voltage and current sensors, including shunts, Current Transformers, Rogowski coils and Hall effect sensors.
Features
- Eight Synchronous Sampling 24-Bit Resolution Delta-Sigma Analog-to-Digital (A/D) Converters
- 94.5 dB SINAD, -107 dBc Total Harmonic Distortion (THD) (up to 35th Harmonic), 112 dBFS SFDR for Each Channel
- Enables 0.1% Typical Active Power Measurement Error Over a 10,000:1 Dynamic Range
- Advanced Security Features:
- 16-Bit Cyclic Redundancy Check (CRC) Checksum on All Communications for Secure Data Transfers
- 16-Bit CRC checksum and Interrupt Alert for Register Map Configuration
- Register Map Lock with 8-Bit Secure Key
- 2.7V-3.6V AVDD, DVDD
- Programmable Data Rate Up to 125 ksps:
- 4 MHz Maximum Sampling Frequency
- 16 MHz Maximum Master Clock
- Oversampling Ratio Up to 4096
- Ultra-Low Power Shutdown Mode with <10 μA
- 122 dB Crosstalk Between Channels
- Low-Drift 1.2V Internal Voltage Reference: 9 ppm/℃
- Differential Voltage Reference Input Pins
- High-Gain Programmable Gain Amplifier (PGA) on Each Channel (up to 32 V/V)
- Phase Delay Compensation with 1 µs Time Resolution
- Separate Data Ready Pin for Easy Synchronization
- Individual 24-Bit Digital Offset and Gain Error Correction for Each Channel
- High-Speed 20 MHz Serial Peripheral Interface (SPI) with Mode 0,0 and 1,1 Compatibility
- Continuous Read/Write Modes for Minimum Communication Time with Dedicated 16/32-Bit Modes
- Available in a 40-Lead UQFN Package
- Extended Temperature Range: -40℃ to +125℃
Applications
- - Polyphase Energy Meters - Energy Metering and Power Measurement - Automotive - Portable Instrumentation - Medical and Power Monitoring - Audio/Voice Recognition
Datasheet
Alternative Parts
Common MCP3914A1T-E/MV alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need MCP3914A1T-E/MV from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for MCP3914A1T-E/MV, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Need MCP3914A1T-E/MV? Send us your required quantity and specifications for a sourcing check and quotation.