MCP3912A1-E/MQ
Energy Metering
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 13.667 MHz |
| Sampling Rate | 4MHz |
| Voltage Reference Value | 1.2V |
| Resolution(Bits) | 24 |
| S/N Ratio | 93.5dB |
| Operating Temp | -40°C ~ +125°C |
| Type | Description |
|---|---|
| Working Voltage V | 3.15 V |
| Channels | 4.0 |
| Function | Simultaneous sampling control;Programmable gain;Digital calibration;Internal reference source;ESD protection |
| Interface | SPI |
| Package / Case | QFN-28 |
Product Introduction
The MCP3912 is a 3V four-channel Analog Front End (AFE) containing four synchronous sampling DeltaSigma Analog-to-Digital Converters (ADC), four PGAs, phase delay compensation block, low-drift internal voltage reference, Digital Offset and Gain Error Calibration registers, and high-speed 20 MHz SPl-compatible serial interface.
The MCP3912 ADCs are fully configurable, with features, such as 16/24-bit resolution, Oversampling Ratio (OSR) from 32 to 4096, gain from 1x to 32x, independent shutdown and Reset, dithering and autozeroing. The communication is largely simplified with 8-bit commands, including various continuous Read/ Write modes and 16/24/32-bit data formats that can be accessed by the Direct Memory Access (DMA) of an 8, 16 or 32-bit MCU. A separate Data Ready pin is also included that can directly be connected to an Interrupt Request (IRQ) input of an MCU.
The MCP3912 includes advanced security features to secure thecommunications and the configurationsettings, such as a CRC-16 checksum on both serial data outputs and static register map configuration. It also includes a register map lock through an 8-bit secure key to stop unwanted wRITE commands from processing.
The MCP3912 is capable of interfacing with a variety of voltage and current sensors, including shunts, current transformers, Rogowski coils and Hall effect sensors.
Features
- Four Synchronous Sampling 24-Bit Resolution Delta-Sigma A/D Converters
- 93.5 dB SINAD, -107 dBc Total Harmonic Distortion (THD) (up to 35th Harmonic), 112 dBFS SFDR for Each Channel
- Enables 0.1% Typical Active Power Measurement Error Over a 10,000:1 Dynamic Range
- Advanced Security Features:
- 16-Bit Cyclic Redundancy Check (CRC) Checksum on All Communications for Secure Data Transfers
- 16-Bit CRC Checksum and Interrupt Alert for Register Map Configuration
- Register Map Lock with 8-Bit Secure Key
- 2.7V - 3.6V AVDD, DVdD
- Programmable Data Rate Up to 125 ksps:
- 4 MHz Maximum Sampling Frequency
- 16 MHz Maximum Master Clock
- Oversampling Ratio Up to 4096
- Ultra-Low Power Shutdown Mode with <10 μA
- 122 dB Crosstalk Between Channels
- Low Drift 1.2V Internal Voltage Reference: 9 ppm/°C
- Differential Voltage Reference Input Pins
- High-Gain PGA on Each Channel (up to 32 V/V)
- Phase Delay Compensation with 1 μs Time Resolution
- Separate Data Ready Pin for Easy Synchronization
- Individual 24-Bit Digital Offset and Gain Error Correction for Each Channel
- High-Speed 20 MHz SPI Interface with Mode 0,0 and 1,1 Compatibility
- Continuous Read/Write Modes for Minimum Communication Time with Dedicated 16/32-Bit Modes
- Available in 28-Lead QFN and 28-Lead SSOP Packages
- Extended Temperature Range: -40°C to +125°C
Applications
- - Polyphase Energy Meters - Energy Metering and Power Measurement - Automotive - Portable Instrumentation - Medical and Power Monitoring - Audio/Voice Recognition
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing MCP3912A1-E/MQ from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For MCP3912A1-E/MQ, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Looking to source MCP3912A1-E/MQ? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.