MCP3901A0T-I/SS
ADCs/DACs - Special Purpose
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 8.692 MHz |
| number of channels | 2 |
| Voltage Reference Value | 2.37V |
| Resolution(Bits) | 24;- |
| S/N Ratio | 91dB |
| Quiescent Current (Iq) | - |
| Type | Description |
|---|---|
| Interface | SPI |
| Working Voltage V | 5 V |
| Function | Simultaneous sampling control;Programmable gain;Internal reference source;Power-on reset;ESD protection |
| Operating Temp | -40°C ~ +125°C |
| Package / Case | SSOP-20 |
Product Introduction
The MCP3901 is a dual channel Analog Front End (AFE) containing two synchronous sampling DeltaSigma Analog-to-Digital Converters (ADC), two PGAs, phase delay compensation block internal voltage reference, modulator output block, and high-speed 20 MHz SPI compatible serial interface. The converters contain a proprietary dithering algorithm for reduced Idle tones and improved THD.
The internal register map contains 24-bit wide ADC data words, a modulator output byte, as well as six writable control registers to program gain, oversampling ratio, phase, resolution, dithering, shutdown, Reset and several communication features. The communication is largely simplified with various Continuous Read modes that can be accessed by the Direct Memory Access (DMA) of an MCU and with a separate data ready pin that can be connected directly to an Interrupt Request (IRQ) input of an MCU.
The MCP3901 is capable of interfacing to a large variety of voltage and current sensors, including shunts, current transformers, Rogowski coils and Halleffect sensors.
Features
- Two Synchronous Sampling 16/24-bit Resolution Delta-Sigma A/D Converters with Proprietary Multi-Bit Architecture
- 91 dB SINAD, -104 dBc Total Harmonic Distortion (THD) (up to 35th harmonic), 109 dB Spurious-free Dynamic Range (SFDR) for Each Channel
- Programmable Data Rate up to 64 ksps
- Ultra Low-Power Shutdown mode with <2 μA
- 133 dB Crosstalk Between the Two Channels
- Low Drift Internal Voltage Reference: 12 ppm/°C
- Differential Voltage Reference Input Pins
- High Gain PGA on Each Channel (up to 32 V/V)
- Phase Delay Compensation Between the Two Channels with 1 µs time Resolution
- Separate Modulator Outputs for Each Channel
- High-Speed, Addressable 20 MHz SPI Interface with Mode 0,0 and 1,1 Compatibility
- Independent Analog and Digital Power Supplies: 4.5V-5.5V AVDD, 2.7V-5.5V DVDD
- Low-Power Consumption: (14 mW typical at 5V)
- Available in Small 20-lead SSOP and QFN Packages
- Industrial Temperature Ranges: - Industrial: -40°C to +85°C - Extended: - -40°C to +125°C
Applications
- - Energy Metering and Power Measurement - Automotive - Portable Instrumentation - Medical and Power Monitoring
Datasheet
Alternative Parts
Common MCP3901A0T-I/SS alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need MCP3901A0T-I/SS from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
For MCP3901A0T-I/SS, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source MCP3901A0T-I/SS? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.