MCP3421A0T-E/CH
Analog to Digital Converters (ADC)
Technical Specifications
| Type | Description |
|---|---|
| Quiescent Current (Iq) | 145uA |
| Integral non - linearity | - |
| Voltage Reference | Built-in |
| Clock/Oscillator | Built-in |
| Resolution(Bits) | 3.75Hz;18 |
| S/N Ratio | - |
| ADC architecture | Sigma-Delta |
| Programmable Gain | Support |
| Type | Description |
|---|---|
| Operating Temp | -40°C ~ +125°C |
| Interface | I2C |
| Working Voltage V | 4.1 V |
| Channels | 1.0 |
| Maximum Clock Speed | - |
| Features | Power-on reset;Soft reset |
| Package / Case | SOT-23-6 |
Product Introduction
A single channel low-noise, high accuracy ΔΣ A/D converter with differential inputs and up to 18 bits of resolution in a small SOT-23-6 package. The on-board precision 2.048V reference voltage enables an input range of ±2.048 V differentially (Δvoltage = 4.096 V). The device uses a two-wire I²C compatible serial interface and operates from a single 2.7V to 5.5V power supply.
The device performs conversion at rates of 3.75, 15, 60, or 240 samples per second (SPS) depending on the user controllable configuration bit settings using the two-wire I²C serial interface. It has an on-board programmable gain amplifier (PGA). The user can select the PGA gain of ×1, ×2, ×4, or ×8 before the analog-to-digital conversion takes place. This allows the device to convert a smaller input signal with high resolution. The device has two conversion modes: (a) Continuous mode and (b) One-Shot mode. In One-Shot mode, the device enters a low current standby mode automatically after one conversion. This reduces current consumption greatly during idle periods.
The device can be used for various high accuracy analog-to-digital data conversion applications where design simplicity, low power, and small footprint are major considerations.
Features
- 18-bit ΔΣ ADC in a SOT-23-6 package
- Differential input operation
- Self calibration of Internal Offset and Gain per each conversion
- On-board Voltage Reference: - Accuracy: 2.048V±0.05% - Drift: 5 ppm/℃
- On-board Programmable Gain Amplifier (PGA): - Gains of 1,2,4 or 8
- On-board Oscillator
- INL: 10 ppm of FSR (FSR = 4.096V/PGA)
- Programmable Data Rate Options: - 3.75 SPS (18 bits) - 15 SPS (16 bits) - 60 SPS (14 bits) - 240 SPS (12 bits)
- One-Shot or Continuous Conversion Options
- Low current consumption: - 145 μA typical (VDD = 3Vs, Continuous Conversion) - 39 μA typical (VDD = 3Vs, One-Shot Conversion with 1 SPS)
- Supports I²C Serial Interface: - Standard, Fast and High Speed Modes
- Single Supply Operation: 2.7V to 5.5V
- Extended Temperature Range: -40℃ to 125℃
Applications
- - Portable Instrumentation - Weigh Scales and Fuel Gauges - Temperature Sensing with RTD, Thermistor, and Thermocouple - Bridge Sensing for Pressure, Strain, and Force.
Datasheet
Alternative Parts
Common MCP3421A0T-E/CH alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing MCP3421A0T-E/CH from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need MCP3421A0T-E/CH, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Looking to source MCP3421A0T-E/CH? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.