MCP3004-I/ST
Analog to Digital Converters (ADC)
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 2.475 MHz |
| Quiescent Current (Iq) | 5nA |
| Integral non - linearity | 1LSB |
| Voltage Reference | External |
| Clock/Oscillator | External |
| Resolution(Bits) | 200kHz;10 |
| S/N Ratio | 61dB |
| DNL (LSB) | 0.25LSB |
| Type | Description |
|---|---|
| ADC architecture | SAR |
| Programmable Gain | Not supported |
| Operating Temp | -40°C ~ +85°C |
| Interface | SPI |
| Working Voltage V | 4.1 V |
| Channels | 4.0 |
| Features | Multiplexers |
| Package / Case | TSSOP-14 |
Product Introduction
The MCP3004/3008 devices are successive approximation 10-bit Analog-to-Digital (A/D) converters with on-board sample and hold circuitry. The MCP3004 is programmable to provide two pseudo-differential input pairs or four single-ended inputs. The MCP3008 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential Nonlinearity (DNL) and Integral Nonlinearity (INL) are specified at ±1 LSB. Communication with the devices is accomplished using a simple serial interface compatible with the SPI protocol. The devices are capable of conversion rates of up to 200 ksps. The MCP3004/3008 devices operate over a broad voltage range (2.7V - 5.5V). Low-current design permits operation with typical standby currents of only 5 nA and typical active currents of 320 μA. The MCP3004 is offered in 14-pin PDIP, 150 mil SOIC and TSSOP packages, while the MCP3008 is offered in 16-pin PDIP and SOIC packages.
Features
- 10-bit resolution
- ±1 LSB max DNL
- ±1 LSB max INL
- 4 (MCP3004) or 8 (MCP3008) input channels
- Analog inputs programmable as single-ended or pseudo-differential pairs
- On-chip sample and hold
- SPI serial interface (modes 0,0 and 1,1)
- Single supply operation: 2.7V - 5.5V
- 200 ksps max. sampling rate at VDD = 5V
- 75 ksps max. sampling rate at VDD = 2.7V
- Low power CMOS technology
- 5 nA typical standby current, 2 μA max.
- 500 μA max. active current at 5V
- Industrial temp range: -40°C to +85°C
- Available in PDIP, SOIC and TSSOP packages
Applications
- - Sensor Interface - Process Control - Data Acquisition - Battery Operated Systems
Datasheet
Alternative Parts
Common MCP3004-I/ST alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing MCP3004-I/ST from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for MCP3004-I/ST, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source MCP3004-I/ST? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.