MCP2561-E/SN
Drivers, Receivers, Transceivers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 5 V |
| Data Rate | 1000000 |
| Iq A | 1.5e-05 |
| number of channels | 1 |
| Supply Current | 70mA |
| Type | Description |
|---|---|
| Type | CAN Transceiver |
| Operating Temp | -40°C ~ +125°C |
| Features | Low-power mode;Wake-up function;Short-Circuit Protection;Thermal shutdown protection;Undervoltage Protection;TXD dominant timeout;ESD protection |
| Package / Case | SOIC-8 |
Product Introduction
The MCP2561/2 is a high-speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2561/2 device provides differential transmit and receive capability for the CAN protocol controller, and is fully compatible with the ISO-11898-2 and ISO-11898-5 standards. It will operate at speeds of up to 1 Mb/s.
Features
- Supports 1 Mb/s Operation
- Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
- Very Low Standby Current <5 μA, typical
- VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
- SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
- CAN Bus Pins are Disconnected when Device is Unpowered: An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
- Detection of Ground Fault: Permanent Dominant Detection on TXD, Permanent Dominant Detection on Bus
- Power-on Reset and Voltage Brown-Out Protection on VDD Pin
- Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
- Protection Against High-Voltage Transients in Automotive Environments
- Automatic Thermal Shutdown Protection
- Suitable for 12V and 24V Systems
- Meets or exceeds stringent automotive design requirements including “Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automo tive Applications”, Version 1.3, May 2012
- High-Noise Immunity Due to Differential Bus Implementation
- High Electrostatic Discharge (ESD) Protection on CANH and CANL, meeting the IEC61000-4-2 up to ±14 kV
- Available in PDIP-8L, SOIC-8L and 3×3 DFN-8L
- Temperature ranges: Extended (E): -40°C to +125°C, High (H): -40°C to +150°C
Datasheet
Alternative Parts
Common MCP2561-E/SN alternatives overseas buyers search for:
- MCP2562-E/SN (request quote)
- TLE8250GVIO (request quote)
- NCV7342D10R2G (request quote)
- MCP2561T-E/SN
- TJA1044T/1Z
- SN65HVDA540QDR (request quote)
- TJA1040T/CM,118 (request quote)
- TJA1050DRG (request quote)
- TJA1050M/TR (request quote)
- HG65HVD230M/TR (request quote)
- SL1040S (request quote)
- TJA1040DRG (request quote)
- TJA1040M/TR (request quote)
- PCA82C251M/TR (request quote)
- HGA82C251M/TR (request quote)
- TJA1040T-JSM (request quote)
- SN65HVD1040DR-JSM (request quote)
- MCP2562-H/SN
- TLE7250GVIOXUMA2 (request quote)
- HGA1040M/TR (request quote)
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing MCP2561-E/SN from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For MCP2561-E/SN, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need MCP2561-E/SN? Send us your required quantity and specifications for a sourcing check and quotation.