MCP2515-I/SO
Controllers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 4.1 V |
| Data Rate | 1000000 |
| Current - Supply | 5mA |
| Features | Single transmission mode;Programmable bit timing;Low-power mode |
| Type | Description |
|---|---|
| Operating Temp | -40°C ~ +85°C |
| Type | CAN Controller |
| Package / Case | SOIC-18-300mil |
Product Introduction
A stand-alone Controller Area Network (CAN) controller that implements the CAN specification, version 2.0B. It is capable of transmitting and receiving both standard and extended data and remote frames. It has two acceptance masks and six acceptance filters that are used to filter out unwanted messages, thereby reducing the host MCU’s overhead. It interfaces with microcontrollers (MCUs) via an industry standard Serial Peripheral Interface (SPI).
Features
- Implements CAN V2.0B at 1 M b/s: 0 – 8 byte length in the data field, Standard and extended data and remote frames
- Receive Buffers, Masks and Filters: Two receive buffers with prioritized message storage, Six 29-bit filters, Two 29-bit masks
- Data Byte Filtering on the First Two Data Bytes (applies to standard data frames)
- Three Transmit Buffers with Prioritization and Abort Features
- High-Speed SPI Interface (10 MHz): SPI modes 0,0 and 1,1
- One-Shot mode Ensures Message Transmission is Attempted Only One Time
- Clock Out Pin with Programmable Prescaler: Can be used as a clock source for other device(s)
- Start-of-Frame (SOF) Signal is Available for Monitoring the SOF Signal: Can be used for time-slot-based protocols and/or bus diagnostics to detect early bus degradation
- Interrupt Output Pin with Selectable Enables
- Buffer Full Output Pins Configurable as: Interrupt output for each receive buffer, General purpose output
- Request-to-Send (RTS) Input Pins Individually Configurable as: Control pins to request transmission for each transmit buffer, General purpose inputs
- Low-Power CMOS Technology: Operates from 2.7V – 5.5V, 5 mA active current (typical), 1 μA standby current (typical) (Sleep mode)
- Temperature Ranges Supported: Industrial (I): -40°C to +85°C, Extended (E): -40°C to +125°C
Datasheet
Alternative Parts
Common MCP2515-I/SO alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need MCP2515-I/SO from Microchip Technology for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
For MCP2515-I/SO, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source MCP2515-I/SO? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.