MCP16301T-I/CHY
Voltage Regulators - DC DC Switching Regulators
Technical Specifications
| Type | Description |
|---|---|
| Output Type | Adjustable |
| Output Voltage | 8.5 V |
| Output Current | 0.6 A |
| Function | Step-down type |
| Working Voltage V | 17 V |
| Switching Freq Hz | 500 kHz |
| Channels | 1 |
| Type | Description |
|---|---|
| Iq A | 0.002 A |
| Switch tube (built-in/external) | Built-in |
| Operating Temp | -40°C ~ +125°C |
| Features | Cycle-by-cycle current limiting;Overcurrent Protection |
| Topology | Buck |
| Package / Case | SOT-23-6 |
Product Introduction
The MCP16301/H devices are highly integrated, high-efficiency, fixed-frequency, step-down DC-DC converters in a popular 6-pin SOT-23 package that operates from input voltage sources up to 36V. Integrated features include a high-side switch, fixed-frequency peak current mode control, internal compensation, peak current limit and overtemperature protection. Minimal external components are necessary to develop a complete step-down DC-DC converter power supply.
High converter efficiency is achieved by integrating the current-limited, low-resistance, high-speed N-Channel MOSFET and associated drive circuitry. High switching frequency minimizes the size of external filtering components, resulting in a small solution size. The MCP16301/H devices can supply 600 mA of continuous current while regulating the output voltage from 2.0V to 15V. An integrated, high-performance peak current mode architecture keeps the output voltage tightly regulated, even during input voltage steps and output current transient conditions that are common in power systems.
The EN input is used to turn the device on and off. While turned off, only a few micro amps of current are consumed from the input for power shedding and load distribution applications.
Output voltage is set with an external resistor divider. The MCP16301/H devices are offered in a space-saving SOT-23-6 surface mount package.
Features
- Up to 96% Typical Efficiency
- Input Voltage Range: - 4.0V to 30V (MCP16301) - 4.7V to 36V (MCP16301H)
- Output Voltage Range: 2.0V to 15V
- 2% Output Voltage Accuracy
- Qualification: AEC-Q100 Rev G, Grade 1 ( -40°C to +125°C )
- Integrated N-Channel Buck Switch: 460 mΩ
- Minimum 600 mA Output Current Over All Input Voltage Range (See Figure 2-6 for Maximum Output Current vs. VIN): - up to 1A output current at 3.3V, 5V and 12V VOUT, SOT-23 package at +25°C ambient temperature
- 500 kHz Fixed Frequency
- Adjustable Output Voltage
- Low Device Shutdown Current
- Peak Current Mode Control
- Internal Compensation
- Stable with Ceramic Capacitors
- Internal Soft-Start
- Cycle-by-Cycle Peak Current Limit
- Undervoltage Lockout (UVLO): 3.5V
- Overtemperature Protection
- Available Package: SOT-23-6
Applications
- - P|C(B) Microcontroller and dsPIC Digital Signal Controller Bias Supply - 24V Industrial Input DC-DC Conversion - Set-Top Boxes - DSL Cable Modems - Automotive - Wall Cube Regulation - SLA Battery-Powered Devices - AC-DC Digital Control Power Source - Power Meters - D2 Package Linear Regulator Replacement - Consumer - Medical and Health Care - Distributed Power Supplies
Datasheet
Alternative Parts
Common MCP16301T-I/CHY alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for MCP16301T-I/CHY from Microchip Technology? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
For MCP16301T-I/CHY, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source MCP16301T-I/CHY? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.