MCP1401T-E/OT
Gate Drivers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 11.25 V |
| Iq A | 0.001 A |
| Input Logic Level - Low | 800mV |
| Low Level Delay Time | - |
| High Level Delay Time | - |
| Input Logic Level - High | 2.4V |
| Driven Configuration | - |
| Current - Output Low(IOL) | 500mA |
| Type | Description |
|---|---|
| Rise Time | 19ns |
| Fall Time | 15ns |
| Current - Output High(IOH) | 500mA |
| Load Type | MOSFET |
| Operating Temp | -40°C ~ +125°C |
| Features | Interleaved conduction protection |
| Package / Case | SOT-23-5 |
Product Introduction
The MCP1401/02 are high-speed MOSFET drivers capable of providing 500 mA of peak current. The inverting or non-inverting single channel output is directly controlled from either TTL or CMOS (3V to 18V). These devices also feature low shoot-through current, matched rise/fall times and propagation delays which make them ideal for high switching frequency applications.
The MCP1401/02 devices operate from a single 4.5V to 18V power supply and can easily charge and discharge 470 pF gate capacitance in under 19 ns (typical). They provide low enough impedances in both the On and Off states to ensure the MOSFET’s intended state will not be affected, even by large transients.
These devices are highly latch-up resistant under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the Ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 1 kV (HBM) and 300V (MM).
Features
- High Peak Output Current: 500 mA (typical)
- Wide Input Supply Voltage Operating Range: - 4.5V to 18V
- Low Shoot-Through/Cross-Conduction Current in Output Stage
- High Capacitive Load Drive Capability: - 470 pF in 19 ns (typical) - 1000 pF in 34 ns (typical)
- Short Delay Times: 35 ns (typical)
- Matched Rise/Fall Times
- Low Supply Current: - With Logic ‘1’ Input – 0.85 mA (typical) - With Logic ‘0’ Input – 0.1 mA (typical)
- Latch-Up Protected: Will Withstand 500 mA Reverse Current
- Logic Input Will Withstand Negative Swing up to 5V
- Space-Saving 5-Lead SOT-23 Package
Applications
- - Switch Mode Power Supplies - Pulse Transformer Drive - Line Drivers - Motor and Solenoid Drive
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing MCP1401T-E/OT from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for MCP1401T-E/OT, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source MCP1401T-E/OT? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.