NXP Semiconductors

MC33772CTP1AE

Battery Management

Manufacturer
MPN
MC33772CTP1AE
Product Type
Package / Case
HLQFP-48(7x7)
Key Attributes
Battery cell controller IC

Technical Specifications

TypeDescription
0V Battery Charge-
Type of BatteryLithium Battery
The Chip TypeBalancing IC;Monitoring IC
Charge Current - Max-
Balance Current300mA
Operating Temperature-40°C~+125°C
TypeDescription
InterfaceI2C;SPI
Quiescent Current32 µA
Supply Voltage5V~30V
FeaturesOvercharge protection;Over-discharge protection;Battery temperature monitoring;Cell balancing
Package / CaseHLQFP-48(7x7)

Product Introduction

The MC33772C is a SMARTMOS lithium-ion battery cell controller IC designed for automotive applications, such as hybrid electric (HEV) and electric vehicles (EV) along with industrial applications, such as energy storage systems (ESS) and uninterruptible power supply (UPS) systems.

The device performs ADC conversions of the differential cell voltages and current, as well as battery coulomb counting and battery temperature measurements. The information is transmitted to MCU using one of the microcontroller interfaces: serial peripheral interface (SPI) or isolated daisy chain communication interface [also referred as transformer physical layer (TPL)] which supports both capacitive and inductive isolation between nodes of the IC. The product is AEC-Q100 qualified and operates up to 125 °C ambient temperature.

Features

  • 5.0 V ≤ VPWR ≤ 30 V operation, 40 V transient
  • 3 to 6 cells management
  • Isolated 2.0 Mbit/s differential communication or 4.0 Mbit/s SPI
  • Addressable on initialization
  • Bi-directional transceiver to support up to 63 nodes in daisy chain
  • 0.8 mV total voltage measurement error
  • Synchronized cell voltage/current measurement with coulomb count
  • Averaging of cell voltage measurements
  • Total stack voltage measurement
  • Seven GPIO/temperature sensor inputs
  • 5.0 V at 5.0 mA reference supply output
  • Automatic over/undervoltage and temperature detection routable to fault pin
  • Integrated sleep mode over/undervoltage and temperature monitoring
  • Onboard 300 mA passive cell balancing with diagnostics
  • Hot plug capable
  • Detection of internal and external faults, as open lines, shorts, and leakage
  • Designed to support ISO 26262, up to ASIL D safety system
  • Fully compatible with the MC33771C and the MC33664
  • Qualified in compliance with AEC-Q100

Applications

  • Automotive: 12 V and high-voltage battery packs
  • E-bikes, e-scooters, drones
  • Energy storage systems
  • Uninterruptible power supply (UPS)
  • Battery junction box

Datasheet

📄 Open Download

Inline preview not available

This datasheet is hosted by the manufacturer, who does not allow it to be embedded. Open the official PDF on www.nxp.com:

Open on www.nxp.com

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Looking for a reliable source for MC33772CTP1AE from NXP Semiconductors? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

For MC33772CTP1AE, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.

Ready to source MC33772CTP1AE? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.