NXP Semiconductors

MC33665ATS4AE

Battery Management

Manufacturer
MPN
MC33665ATS4AE
Product Type
Package / Case
SOT-1571-1
Key Attributes
Interface: I2C;SPI
Operating Temperature: -40℃~+125℃
Operating Voltage: 5V~40V
Quiescent Current: 25uA
0V Battery Charge: Not supported

Technical Specifications

TypeDescription
0V Battery ChargeNot supported
Type of Battery-
The Chip Type-
Balance Current-
Charge Current - Max-
Operating Temperature-40°C~+125°C
TypeDescription
InterfaceI2C;SPI
Quiescent Current25 µA
Supply Voltage5V~40V
Features-
Package / CaseSOT-1571-1

Product Introduction

MC33665A is a universal battery management communication gateway and Transformer Physical Layer (TPL) transceiver. The device forwards messages from different TPL (NXP's isolated daisy-chain protocol) ports via standard communication protocols. Standard communication protocols ensure compatibility with MCUs available on the market. The MC33665A is designed to implement one of two distinct functions: an enhanced TPL transceiver or a TPL-to-CAN (FD) gateway.

In the enhanced TPL transceiver variant, the device communicates directly with the MCU via SPI or UART. The device forwards messages from the integrated TPL ports.

In the CAN (FD) variant, the MC33665A connects to BMS devices via TPL. The device powers an external CAN transceiver, making it part of the CAN bus without requiring a microcontroller.

The MC33665A provides four isolated TPL daisy-chain ports for communication with other isolated BMS devices in the daisy chain. Each daisy-chain port supports capacitive and inductive isolation communication, ensuring interoperability with NXP battery management devices such as MC33771C, MC33772C, and MC33775A. The MC33665A supports communication protocols compliant with ASIL D and conforms to AEC-Q100 Grade 1.

Features

  • MCU host interface supporting SPI, CAN (FD), or UART
  • SPI
  • Single or dual SPI mode
  • Data rate up to 10 Mbit/s
  • CAN/CAN FD
  • CAN data rate up to 1 Mbit/s
  • CAN FD data rate up to 5 Mbit/s
  • UART
  • Full-duplex and half-duplex operation
  • Auto baud rate (ABR) detection
  • Data rate up to 6 Mbit/s
  • Selectable IO voltage: 5 V or 3.3 V
  • Message buffering
  • Configurable response and request buffers
  • Status/handshake signals for data flow control
  • Communication management unit
  • Error detection and reporting
  • Multi-port TPL interface
  • Four independent TPL daisy-chain ports
  • Automatic message routing based on TPL message address
  • Protocol supporting up to 6 TPL daisy chains with 62 nodes per chain
  • Per daisy chain:
  • Data rate of 2 Mbit/s
  • Two-wire daisy chain supporting capacitive or inductive isolation
  • Loopback support
  • Compatible with TPL2-based products (e.g., MC33771C or MC33772C)
  • Compatible with TPL3-based products (e.g., MC33775A)
  • Message synchronization
  • Enables message synchronization across all TPL daisy-chain ports
  • Message transmission triggered by external events (SYNC)
  • Programmable time delay between messages
  • Power options
  • Powered via external 5 V regulator or integrated 5 V regulator
  • Power mode management for external CAN (FD) transceiver
  • Operating modes
  • Active mode
  • Sleep mode (25 μA typical)
  • Device wake-up sources
  • TPL daisy chain
  • MCU communication
  • Wake-up input
  • Internal oscillator and external crystal support
  • General-purpose I/O (GPIO) with assignable status and events
  • I2C bus master interface for controlling external devices such as EEPROM and security ICs
  • Unique device ID
  • AEC-Q100 Grade 1 compliant: ambient temperature range -40 °C to +125 °C
  • Supports NXP's ASIL D-compatible protocol

Datasheet

📄 Open Download

Inline preview not available

This datasheet is hosted by the manufacturer, who does not allow it to be embedded. Open the official PDF on www.nxp.com:

Open on www.nxp.com

Alternative Parts

Common MC33665ATS4AE alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Looking for a reliable source for MC33665ATS4AE from NXP Semiconductors? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

When you need MC33665ATS4AE, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Need MC33665ATS4AE? Send us your required quantity and specifications for a sourcing check and quotation.