MAX96716AGTM/VY+T
Serializers, Deserializers
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 25 MHz |
| Output | CSI-2 |
| Input | GMSL |
| Number of ports | 2 |
| Parallel Bit Count Per Channel | 4 |
| Control Interface | I2C;SPI |
| Type | Description |
|---|---|
| Data Rate | 6000000000.0 |
| Type | Deserializer |
| Working Voltage V | 1.663 V |
| Features | Adaptive receive equalization;Link status monitoring |
| Operating Temp | -40°C ~ +105°C |
| Package / Case | TQFN-48 |
Product Introduction
The MAX96716A converts dual GMSL2 serial inputs to MIPI CSI-2. It also transmits and receives control channel data, enabling forward-path video and bidirectional control data transfer. The GMSL2 link operates at a fixed rate of 6Gbps or 3Gbps in the forward direction and 187.5Mbps in the reverse direction. The GMSL2 inputs operate independently, allowing video with different timing and resolutions to be received on each input. Video data from both inputs can be aggregated and output through a single CSI-2 port, or replicated on a second port for redundancy. The device and connected serializers are programmed via I²C or UART. The operating temperature range is specified as -40℃ to +105℃, and the device is AEC-Q100 qualified. Data can be transmitted over low-cost 50Ω coaxial cable or 100Ω shielded twisted-pair cable compliant with GMSL2 channel specifications.
Features
- Full-duplex capability over a single coaxial or shielded twisted-pair cable
- Forward link rate: 3Gbps or 6Gbps
- Reverse link rate: 187.5Mbps
- Dual quad-lane D-PHY or dual two-lane C-PHY MIPI CSI-2 v1.3 output ports
- Aggregation and replication support
- 16 virtual channel support
- RAW8/10/12/14/16/20, RGB565/666/888, YUV422 8/10-bit, user-defined, and generic long packet data type support
- Advanced MIPI D-PHY v1.2 transmitter, 80Mbps to 2.5Gbps per lane
- Advanced MIPI C-PHY v1.0 transmitter, 182Mbps to 4.56Gbps per lane
- Reverse reference channel for crystal-less serializer operation
- ASIL-B compliant
- End-to-end data integrity via CRC in tunnel mode
- R-S FEC protection for forward video and control channel data
- 16-bit CRC protection for sideband channel data with retransmission on error detection
- 32-bit CRC protection for video line data
- Forward and reverse channel PRBS for serial link BER testing
- Continuous link margin monitoring and optimization
- Continuous adaptive equalization
- Forward and reverse channel eye opening monitoring for continuous link margin diagnostics
- Concurrent sideband channel for device configuration and peripheral communication
- I²C/UART, pass-through I²C/UART, SPI, GPIO, and register-programmable GPIO support
- Four hardware-programmable device addresses
- 48-pin 7mm × 7mm TQFN wettable flank package, 0.5mm pitch
Applications
- - ADAS camera systems - Satellite LiDAR - Front-view camera systems - Surround-view systems - Driver monitoring systems - Multi-synchronized camera systems
Datasheet
Alternative Parts
Common MAX96716AGTM/VY+T alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for MAX96716AGTM/VY+T from Maxim Integrated? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
When you need MAX96716AGTM/VY+T, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Need MAX96716AGTM/VY+T? Send us your required quantity and specifications for a sourcing check and quotation.