MAX3471EUA+T
Drivers, Receivers, Transceivers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 4 V |
| Data Rate | 64000 |
| Iq A | 1.6e-06 |
| ESD Protect | - |
| Communication Mode | Half-Duplex |
| Number of Drivers | 1 |
| Type | Description |
|---|---|
| Number of Receivers | 1 |
| Type | Transceiver |
| Nodes | - |
| Operating Temp | -40°C ~ +85°C |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection |
| Package / Case | MSOP-8 |
Product Introduction
The MAX3471 half- duplex transceiver is intended for lithium battery- powered RS- 485/RS- 422 applications. It draws only 1.6μA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation over the lifetime of a lithium battery.
This device features true fail- safe operation that guarantees a logic- high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). The MAX3471 has a 1/8- unit load input resistance. When driver outputs are enabled and pulled above VCC or below GND, internal circuitry prevents battery backcharging.
The MAX3471 is available in an 8- pin μMAX package.
Features
- +1.6μA Supply Current with Receiver Enabled
- +2.5V to +5.5V Single- Supply Operation
- True Fail- Safe Receiver Input
- Available in μMAX Package
- 1/8- Unit- Load Receiver Input
- 7V to +10V Common- Mode Input Voltage Range
Applications
- - Remote Meter Reading - Battery- Powered Differential Communications - Level Translators
Datasheet
Alternative Parts
Common MAX3471EUA+T alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Need MAX3471EUA+T from Maxim Integrated for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
When you need MAX3471EUA+T, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source MAX3471EUA+T? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.