MAX17048G+T10
Battery Management
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.5 V |
| Interface | I2C |
| Iq A | 3e-06 |
| 0V Battery Charge | Not supported |
| Type of Battery | Lithium Battery |
| The Chip Type | Monitoring IC |
| Type | Description |
|---|---|
| Balance Current | - |
| Charge Current - Max | - |
| Operating Temp | -40°C ~ +85°C |
| Features | Automatic recharge;Overcharge protection;Over-discharge protection;Programmable charging current |
| Package / Case | DFN-8-EP |
Product Introduction
The MAX17048/MAX17049 ICs are tiny, micropower current fuel gauges for lithium-ion (Li+) batteries in handheld and portable equipment. The MAX17048 operates with a single lithium cell and the MAX17049 with two lithium cells in series.
The ICs use the sophisticated Li+ battery-modeling algorithm ModelGauge to track the battery relative state-ofcharge (SOC) continuously over widely varying charge and discharge conditions. The ModelGauge algorithm eliminates current-sense resistor and battery-learn cycles required in traditional fuel gauges. Temperature compensation is implemented using the system microcontroller.
The ICs automatically detect when the battery enters a low-current state and enters low-power 3μA hibernate mode, while still providing accurate fuel gauging. The ICs automatically exit hibernate mode when the system returns to active state.
On battery insertion, the ICs debounce initial voltage measurements to improve the initial SOC estimate, thus allowing them to be located on system side. SOC, voltage, and rate information is accessed using the I2C interface. The ICs are available in a tiny 0.9mm×1.7mm, 8-bump wafer-level package (WLP), or a 2mm x 2mm, 8-pin TDFN package.
Features
- MAX17048: 1 Cell, MAX17049: 2 Cells
- Precision ±7.5mV/Cell Voltage Measurement
- ModelGauge Algorithm
- Provides Accurate State-of-Charge
- Compensates for Temperature/Load Variation
- Does Not Accumulate Errors, Unlike Coulomb Counters
- Eliminates Learning
- Eliminates Current-Sense Resistor
- Ultra-Low Quiescent Current
- 3μA Hibernate, 23μA Active
- Fuel Gauges in Hibernate Mode
- Automatically Enters and Exits Hibernate Mode
- Reports Charge and Discharge Rate
- Battery-Insertion Debounce
- Best of 16 Samples to Estimate Initial SOC
- Programmable Reset for Battery Swap
- 2.28V to 3.48V Range
- Configurable Alert Indicator
- Low SOC
- 1% Change in SOC
- Battery Undervoltage/Overvoltage
- VRESET Alert
- I2C Interface
- 8-Bit OTP ID Register (Contact Factory)
Applications
- - Smartphones, Tablets - Smartwatches, Wearables - Bluetooth Headsets - Health and Fitness Monitors - Digital Still, Video, and Action Cameras - Medical Devices - Handheld Computers and Terminals - Wireless Speakers - Home and Building Automation, Sensors
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Looking for a reliable source for MAX17048G+T10 from Maxim Integrated? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
For MAX17048G+T10, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source MAX17048G+T10? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.