LTM4622EY#PBF
DC DC Converters
Technical Specifications
| Type | Description |
|---|---|
| Output Voltage | 3.05 V |
| Function | Step-down type |
| Working Voltage V | 11.8 V |
| Switching Freq Hz | 1 MHz |
| Channels | 2 |
| Iq A | 0.001 A |
| Iout | 2.5A |
| Type | Description |
|---|---|
| Output Voltage Accuracy | +/-1.5% |
| Ripple Noise | 5mVp-p |
| Height Mm | 2.42 |
| Operating Temp | -40°C ~ +125°C |
| Length Mm | 6.25 |
| Width Mm | 6.25 |
| Package / Case | BGA-25 |
Product Introduction
The LTM4622 is a complete dual 2.5A step-down switching mode µModule (powermodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA packages. Included in the package are the switching controller, power FETs, inductor and support components. Operating over an input voltage range of 3.6 to 20V, the LTM4622 supports an output voltage range of 0.6 to 5.5V, set by a single external resistor. Its high efficiency design delivers dual 2.5A continuous, 3A peak, output current. Only a few ceramic input and output capacitors are needed.
The LTM4622 supports selectable Burst Mode operation and output voltage tracking for supply rail sequencing. Its high switching frequency and current mode control enable a very fast transient response to line and load changes without sacrificing stability.
Fault protection features include input overvoltage, output overcurrent and overtemperature protection.
The LTM4622 is available with SnPb (BGA) or RoHS compliant terminal finish.
Features
- Complete Solution in <1cm2
- Wide Input Voltage Range: 3.6V to 20V
- 3.3V Input Compatible with VIN Tied to GND
- 0.6V to 5.5V Output Voltage
- Dual 2.5A (3A Peak) or Single 5A Output Current
- ±1.5% Maximum Total Output Voltage Regulation
- Error Over Load, Line and Temperature
- Current Mode Control, Fast Transient Response
- External Frequency Synchronization
- Multiphase Parallelable with Current Sharing
- Output Voltage Tracking and Soft-Start Capability
- Selectable Burst Mode Operation
- Overvoltage Input and Overtemperature Protection
- Power Good Indicators
- 6.25mm × 6.25mm × 1.82mm LGA and 6.25mm × 6.25mm × 2.42mm BGA Packages
Applications
- - General Purpose Point-of-Load Conversion - Telecom, Networking and Industrial Equipment - Medical Diagnostic Equipment - Test and Debug Systems
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| Type | Details |
|---|---|
| ECCN | EAR99 |
Sourcing Information
Need LTM4622EY#PBF from Analog Devices for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for LTM4622EY#PBF, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source LTM4622EY#PBF? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.