Analog Devices

LT3571IUD#TRPBF

Voltage Regulators - DC DC Switching Regulators

Manufacturer
MPN
LT3571IUD#TRPBF
Package / Case
QFN-16-EP(3x3)
Key Attributes
75V DC/DC Converter for APD Bias

Technical Specifications

TypeDescription
Output TypeAdjustable
Output Current370 mA
FunctionBoost
Switching Freq Hz2 MHz
Channels1
Quiescent Current1.7 mA
Switch Tube (built-in/external)Built-in
TypeDescription
Operating Temperature-40°C~+125°C@(TA)
FeaturesAdjustable current limiting;Frequency synchronization;Dynamic voltage scaling
TopologyBoost
Supply Voltage2.7V~20V
Output Voltage2.7V~75V
Package / CaseQFN-16-EP(3x3)

Product Introduction

High APD Voltage: Up to 70V

Integrated Schottky Diode 75V, 370mA Internal Switch

High-Side Fixed Voltage Drop APD Current Monitor

Adjustable Frequency: 250kHz to 2MHz

Frequency Synchronization

Wide Voltage Range: 2.7V to 20V

Constant Voltage and Constant Current Regulation

Programmable Current Limit Protection

Surface Mount Component

Low Shutdown Current <1μA

Internal Soft-Start

Internal Compensation

CTRL Pin Allows Output Adjustment Without Polarity Reversal

3mm x 3mm 16-Pin QFN Package

The LT3571 is a current mode boost DC/DC converter designed to bias avalanche photodiodes (APDs) in optical receivers, with output voltage up to 75V. The LT3571 features a high-side fixed voltage drop APD current monitor with better than 10% relative accuracy over the full temperature range. The integrated power switch, Schottky diode, and APD current monitor enable a compact, low-cost solution. It combines a conventional voltage loop with a unique current loop, allowing operation as either a constant current source or constant voltage source. The inductor-based topology ensures the input is protected from switching noise. The integrated high-side current monitor produces a current proportional to the APD current, with better than 10% relative accuracy over a dynamic range spanning four decades for input currents from 250nA to 2.5mA. This current can be used as a reference to provide digitally programmed output voltage via the CTRL pin. The LT3571 is housed in a compact 3mm x 3mm 16-pin QFN package.

Datasheet

📄 Open Download

Alternative Parts

Common LT3571IUD#TRPBF alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Sourcing LT3571IUD#TRPBF from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

When you need LT3571IUD#TRPBF, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Need LT3571IUD#TRPBF? Send us your required quantity and specifications for a sourcing check and quotation.