Analog Devices

LT3045IMSE#TRPBF

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Manufacturer
MPN
LT3045IMSE#TRPBF
Package / Case
MSOP-12-EP
Key Attributes
20V, 500mA, Ultralow Noise, Ultrahigh PSRR Linear Regulator

Technical Specifications

TypeDescription
Output TypeAdjustable
Output Voltage7.5 V
Output Current0.5 A
Working Voltage V20 V
Channels1
TypeDescription
Iq A0.002 A
Output ConfigurationPositive
Operating Temp-40°C ~ +125°C @(Tj)
FeaturesEnable control;Adjustable current limiting;Operating status indication;Input under-voltage protection;Reverse polarity voltage protection;Reverse-polarity current protection;Short Circuit Protection;Thermal shutdown;Over Current Protection
Package / CaseMSOP-12-EP

Product Introduction

The LT3045 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3045 can be easily paralleled to further reduce noise, increase output current and spread heat on the PCB.

The device supplies 500mA at a typical 260mV dropout voltage. Operating quiescent current is nominally 2.2mA and drops to <1µA in shutdown. The LT3045’s wide output voltage range (0V to 15V) while maintaining unity - gain operation provides virtually constant output noise, PSRR, bandwidth and load regulation, independent of the programmed output voltage. Additionally, the regulator features programmable current limit, fast start - up capability and programmable power good to indicate output voltage regulation.

The LT3045 is stable with a minimum 10µF ceramic output capacitor. Built - in protection includes reverse - battery protection, reverse - current protection, internal current limit with foldback and thermal limit with hysteresis. The LT3045 is available in thermally enhanced 12 - Lead MSOP and 10 - Lead 3mm × 3mm DFN packages.

Features

  • Ultralow RMS Noise: 0.8µV_{RMS} (10Hz to 100kHz)
  • Ultralow Spot Noise: 2nV/√Hz at 10kHz
  • Ultrahigh PSRR: 76dB at 1MHz
  • Output Current: 500mA
  • Wide Input Voltage Range: 1.8V to 20V
  • Single Capacitor Improves Noise and PSRR
  • 100µA SET Pin Current: ±1% Initial Accuracy
  • Single Resistor Programs Output Voltage
  • High Bandwidth: 1MHz
  • Programmable Current Limit
  • Low Dropout Voltage: 260mV
  • Output Voltage Range: 0V to 15V
  • Programmable Power Good
  • Fast Start - Up Capability
  • Precision Enable/UVLO
  • Parallelable for Lower Noise and Higher Current
  • Internal Current Limit with Foldback
  • Minimum Output Capacitor: 10µF Ceramic
  • Reverse - Battery and Reverse - Current Protection
  • 12 - Lead MSOP and 10 - Lead 3mm × 3mm DFN Package

Applications

  • - RF Power Supplies: PLLs, VCOs, Mixers, LNAs, PAs - Very Low Noise Instrumentation - High Speed/High Precision Data Converters - Medical Applications: Imaging, Diagnostics - Precision Power Supplies - Post - Regulator for Switching Supplies

Datasheet

📄 Open Download

Alternative Parts

Common LT3045IMSE#TRPBF alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Sourcing LT3045IMSE#TRPBF from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

When you need LT3045IMSE#TRPBF, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Ready to source LT3045IMSE#TRPBF? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.