Analog Devices

LT3045EDD-1#TRPBF

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Manufacturer
MPN
LT3045EDD-1#TRPBF
Package / Case
DFN-12
Key Attributes
20V, 500mA, Ultralow Noise, Ultrahigh PSRR Linear Regulator with VIOC Control

Technical Specifications

TypeDescription
Output TypeAdjustable
Output Voltage7.5 V
Output Current0.5 A
Working Voltage V20 V
Channels1
TypeDescription
Iq A0.002 A
Output ConfigurationPositive
Operating Temp-40°C ~ +125°C @(Tj)
FeaturesAdjustable current limiting;Operating status indication;Enable control;Input under-voltage protection;Reverse polarity voltage protection;Reverse-polarity current protection;Thermal shutdown;Short Circuit Protection;Over Current Protection
Package / CaseDFN-12

Product Introduction

The LT3045-1 is a high performance low dropout linear regulator featuring ultralow noise and ultrahigh PSRR architecture for powering noise sensitive applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3045-1 can be easily paralleled to further reduce noise, increase output current and spread heat on the PCB. In addition to the LT3045 feature set, the LT3045-1 incorporates a VIOC tracking function to control an upstream switching converter to maintain a constant voltage across the LT3045-1 and hence minimize power dissipation.

The device supplies 500mA at a typical 260mV dropout voltage. Operating quiescent current is nominally 2.3mA and drops to <1µA in shutdown. The LT3045-1’s wide output voltage range (0V to 15V) while maintaining unity-gain operation provides virtually constant output noise, PSRR, bandwidth and load regulation, independent of the programmed output voltage. Additionally, the regulator features programmable current limit, fast start-up capability and programmable power good to indicate output voltage regulation.

Features

  • Ultralow RMS Noise: 0.8µV_RMS (10Hz to 100kHz)
  • Ultralow Spot Noise: 2nV/√Hz at 10kHz
  • Ultrahigh PSRR: 76dB at 1MHz
  • Output Current: 500mA
  • Wide Input Voltage Range: 1.8V to 20V
  • Single Capacitor Improves Noise and PSRR
  • 100µA SET Pin Current: ±1% Initial Accuracy
  • VIOC Pin Controls Upstream Regulator to Minimize Power Dissipation
  • Single Resistor Programs Output Voltage
  • Programmable Current Limit
  • Low Dropout Voltage: 260mV
  • Output Voltage Range: 0V to 15V
  • Programmable Power Good
  • Fast Start-Up Capability
  • Precision Enable/UVLO
  • Parallelable for Lower Noise and Higher Current
  • Internal Current Limit with Foldback
  • Minimum Output Capacitor: 10µF Ceramic
  • Reverse-Battery and Reverse-Current Protection
  • 12-Lead MSOP and 3mm × 3mm DFN Packages

Applications

  • - RF Power Supplies: PLLs, VCOs, Mixers, LNAs, PAs - Very Low Noise Instrumentation - High Speed/High Precision Data Converters - Medical Applications: Imaging, Diagnostics - Post-Regulator for Switching Supplies

Datasheet

📄 Open Download

Alternative Parts

Common LT3045EDD-1#TRPBF alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Sourcing LT3045EDD-1#TRPBF from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for LT3045EDD-1#TRPBF, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Looking to source LT3045EDD-1#TRPBF? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.