Texas Instruments

LP2951-50QDRQ1

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators

Manufacturer
MPN
LP2951-50QDRQ1
Package / Case
SOIC-8
Key Attributes
Automotive 100mA, 30V, Low Dropout Regulator with Power Good Indicator and Enable Function

Technical Specifications

TypeDescription
Output TypeAdjustable;Fixed
Output Current100 mA
Supply Voltage30 V
Channels1
Quiescent Current75 µA
TypeDescription
Output ConfigurationPositive
Output Voltage1.235V~30V
Operating Temperature-40°C~+125°C
FeaturesEnable control;Reset function;Over Current Protection;Thermal shutdown
Package / CaseSOIC-8

Product Introduction

The LP2951-xx-Q1 devices are bipolar, low-dropout voltage regulators that can accommodate a wide input supply-voltage range of up to 35 V. The 8-pin LP2951-xx-Q1 is able to output either a fixed or adjustable output from the same device. By tying the OUTPUT and SENSE pins together, and the FEEDBACK and V_TAP pins together, the LP2951-xxQ1 outputs a fixed 5 V and 3.3 V (depending on the version). Alternatively, by leaving the SENSE and V_TAP pins open and connecting FEEDBACK to an external resistor divider, the output can be set to any value between 1.235 V to 30 V.

The 8-pin LP2951-xx-Q1 also offers additional functionality that makes it particularly suitable for battery-powered applications. For example, a logic-compatible shutdown feature allows the regulator to be put in standby mode for power savings. In addition, there is a built-in supervisor reset function in which the ERROR output goes low when V_OUT drops by 6% of its nominal value for whatever reasons – due to a drop in V_IN, current limiting, or thermal shutdown.

The LP295x-xx-Q1 devices are designed to minimize all error contributions to the output voltage. With a tight output tolerance (0.5% at 25°C), a very low output voltage temperature coefficient (20 ppm typical), extremely good line and load regulation (0.3% and 0.4% typical), and remote sensing capability, the parts can be used as either low-power voltage references or 100-mA regulators.

Features

  • Qualified for Automotive Applications
  • Wide Input Range: Up to 35 V
  • Rated Output Current of 100 mA
  • Low Dropout: 380 mV (Typ) at 100 mA
  • Low Quiescent Current: 75 μA (Typ)
  • Tight Line Regulation: 0.03% (Typ)
  • Tight Load Regulation: 0.04% (Typ)
  • High V_0 Accuracy: 1.4% at 25°C, 2% Over Temperature
  • Can Be Used as a Regulator or Reference
  • Stable With Low ESR (> 2 mΩ) Capacitors
  • Current- and Thermal-Limiting Features
  • 8-Pin Package – Fixed Voltages: 5 V/ADJ and 3.3 V/ADJ
  • Low-Voltage Error Signal on Falling Output
  • Shutdown Capability
  • Remote Sense Capability for Optimal Output Regulation and Accuracy

Applications

  • Automotive Power
  • Battery to MCU Regulator
  • Sensor Supply
  • Infotainment
  • Body Control Module
  • Secondary Side Regulation
  • Point of Load Regulation

Datasheet

📄 Open Download

Alternative Parts

Common LP2951-50QDRQ1 alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Sourcing LP2951-50QDRQ1 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for LP2951-50QDRQ1, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Ready to source LP2951-50QDRQ1? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.