Texas Instruments

LM74502DDFR

OR Controllers, Ideal Diodes

Manufacturer
MPN
LM74502DDFR
Package / Case
TSOT-23-8
Key Attributes
Low-IQ high-side switch controller with reverse polarity protection and overvoltage protection functions

Technical Specifications

TypeDescription
Operating temperature-40°C ~ +125°C
Control Input LogicActive High
Working Voltage V34.1 V
Rds On Ohm2 Ω
TypeDescription
FunctionOvervoltage protection;Under-voltage lockout;Reverse voltage protection;Integrated charge pump
TypeHigh Side Switch
Package / CaseTSOT-23-8

Product Introduction

The LM74502/LM74502H controllers work in conjunction with externally back-to-back connected N-channel MOSFETs to provide a solution for low-loss reverse polarity protection and load disconnection. The device can also be configured as a load switch with overvoltage protection to drive high-side MOSFETs. The wide supply input range of 3.2V to 65V enables control of many commonly used DC bus voltages (e.g., 12V, 24V, and 48V input systems). The device can withstand and protect the load from negative supply voltages as low as -65V. The LM74502/LM74502H does not have reverse current blocking functionality and is only suitable for input reverse polarity protection.

The LM74502 controller provides a charge pump gate drive for external N-channel MOSFETs. When the enable pin is low, the controller turns off and consumes approximately 1μA of current, thus providing low system current when entering sleep mode. The LM74502 and LM74502H also feature programmable overvoltage and undervoltage protection, which can disconnect the load from the input source in the event of a fault. These devices are available in a 2.9mm × 1.6mm 8-pin DDF package and are rated for an operating temperature range of – 40°C to +125°C.

Features

  • 3.2V to 65V input range (3.9V startup)
  • 65V input reverse voltage rating
  • Integrated charge pump for driving:
  • External back-to-back N-channel MOSFETs
  • External high-side switch MOSFETs
  • External reverse polarity protection MOSFETs
  • Gate driver models:
  • LM74502: 60μA peak gate drive source current capability
  • LM74502H: 11mA peak gate drive source current capability
  • 2.3A peak gate sink current capability
  • EN pin features:
  • 45μA typical operating quiescent current (EN/UVLO = HIGH)
  • 1μA shutdown current (EN/UVLO = LOW)
  • Adjustable overvoltage and undervoltage protection
  • 40°C to +125°C ambient operating temperature range
  • 8-pin SOT-23 package, 2.90mm×1.60mm

Applications

  • - Factory automation and control PLC digital output modules - Industrial motor drives - Industrial transportation - Power supply reverse polarity protection

Datasheet

📄 Open Download

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8536500090
USHTS8536507000
TARIC8536500300
TypeDetails
CAHTS8536501000
BRHTS85365090
INHTS85365090
MXHTS8536.50.09

Sourcing Information

Sourcing LM74502DDFR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

When you need LM74502DDFR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Need LM74502DDFR? Send us your required quantity and specifications for a sourcing check and quotation.