Texas Instruments

LM5069MM-2/NOPB

Power Distribution Switches, Load Drivers

Manufacturer
MPN
LM5069MM-2/NOPB
Package / Case
VSSOP-10-0.5mm
Key Attributes
Positive High-Voltage Hot Swap and In-Rush Current Controller With Power Limiting

Technical Specifications

TypeDescription
Operating Temperature Range-40°C ~ +125°C
FET TypeExternal FET
Threshold Voltage55mV
Peak Output Current(Source)16uA
Peak Output Current(Sink)2mA
Length Mm3.0
Height Mm1.1
TypeDescription
FeaturesOvercurrent Protection;Short-Circuit Protection;Under-voltage lockout
Width Mm3.0
Channels1.0
Rated Voltage44.5 V
Rds On Ohm-
Package / CaseVSSOP-10-0.5mm

Product Introduction

The LM5069 positive hot swap controller provides intelligent control of the power supply connections during insertion and removal of circuit cards from a live system backplane or other hot power sources. The LM5069 provides in-rush current control to limit system voltage droop and transients. The current limit and power dissipation in the external series pass NChannel MOSFET are programmable, ensuring operation within the Safe Operating Area (SOA). The POWER GOOD output indicates when the output voltage is within 1.25 V of the input voltage. The input undervoltage and overvoltage lockout levels and hysteresis are programmable, as well as the initial insertion delay time and fault detection time. The LM5069-1 latches off after a fault detection, while the LM5069-2 automatically restarts at a fixed duty cycle. LM5069 is available in a 10-pin VSSOP package.

Features

  • Wide Operating Range: 9 V to 80 V
  • In-Rush Current Limit for Safe Board Insertion into Live Power Sources
  • Programmable Maximum Power Dissipation in the External Pass Device
  • Adjustable Current Limit
  • Circuit Breaker Function for Severe Overcurrent Events
  • Internal High Side Charge Pump and Gate Driver for External N-channel MOSFET
  • Adjustable Undervoltage Lockout (UVLO) and Hysteresis
  • Adjustable Overvoltage Lockout (OVLO) and Hysteresis
  • Initial Insertion Timer Allows Ringing and Transients to Subside after System Connection
  • Programmable Fault Timer Avoids Nuisance Trips
  • Active High Open Drain POWER GOOD Output
  • Available in Latched Fault and Automatic Restart Versions
  • 10-Pin VSSOP Package

Applications

  • - Server Backplane Systems - Base Station Power Distribution Systems - Solid State Circuit Breaker - 24-V and 48-V Industrial Systems

Datasheet

📄 Open Download

Alternative Parts

Common LM5069MM-2/NOPB alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS
ECCNEAR99
CNHTS8536300000
USHTS8536308000
TARIC8536301010
TypeDetails
CAHTS8536302000
BRHTS85363090
INHTS85363000
MXHTS8536.30.01

Sourcing Information

Looking for a reliable source for LM5069MM-2/NOPB from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

When you need LM5069MM-2/NOPB, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Looking to source LM5069MM-2/NOPB? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.