LAN8740A-EN
Drivers, Receivers, Transceivers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 2.55 V |
| Interface | MII;RMII |
| Ethernet Speed Standards | 10BASE-T;100BASE-TX |
| number of channels | 1 |
| Type | Description |
|---|---|
| Type | Ethernet Transceiver |
| Operating Temp | 0°C ~ +70°C |
| Features | Cable diagnostics;Low-power mode;Power-on reset;Programmable LED indication;Error detection and recovery |
| Package / Case | QFN-32-EP |
Product Introduction
The LAN8740A/LAN8740Ai is a low-power 10BASE-T/100BASE-TX physical layer (PHY) transceiver with variable I/O voltage that is compliant with the IEEE 802.3, 802.3u, and 802.3az (Energy Efficient Ethernet) standards. Energy Efficient Ethernet (EEE) support results in significant power savings during low link utilizations.
The LAN8740A/LAN8740Ai supports communication with an Ethernet MAC via a standard MII (IEEE 802.3u)/RMII interface. It contains a full-duplex 10-BASE-T/100BASE-TX transceiver and supports 10 Mbps (10BASE-T) and 100 Mbps (100BASE-TX) operation. The LAN8740A/LAN8740Ai implements auto-negotiation to automatically determine the best possible speed and duplex mode of operation. HP Auto-MDIX support allows the use of direct connect or cross-over LAN cables. Integrated Wake on LAN (WoL) support provides a mechanism to trigger an interrupt upon reception of a perfect DA, broadcast, magic packet, or wakeup frame.
The LAN8740A/LAN8740Ai supports both IEEE 802.3-2005 compliant and vendor-specific register functions. However, no register access is required for operati
Features
- Single-Chip Ethernet Physical Layer Transceiver (PHY)
- Compliant with Energy Efficient Ethernet 802.3az
- Cable diagnostic support
- Wake on LAN (WoL) support
- Comprehensive flexPWR technology - Flexible power management architecture - LVCMOS Variable I/O voltage range: +1.8 V to +3.3 V - Integrated 1.2 V regulator with disable feature
- HP Auto-MDIX support
- Small footprint 32-pin VQFN, RoHS-compliant package (5×5×0.9 mm height)
- Deterministic 100 Mb internal loopback latency (MII Mode)
- Compliant with IEEE802.3/802.3u (Fast Ethernet)
- Compliant with ISO 802-3/IEEE 802.3 (10BASE-T)
- Compliant with Energy Efficient Ethernet IEEE 802.3az Loop-back modes
- Auto-negotiation
- Automatic polarity detection and correction
- Link status change wake-up detection
- Vendor specific register functions
- Supports both MII and the reduced pin count RMII interfaces
- Various low power modes
- Integrated power-on reset circuit
- Two status LED outputs
- May be used with a single 3.3 V supply
- Ability to use a low cost 25 MHz crystal for reduced BOM
- 32-pin VQFN (5×5 mm), RoHS-compliant package with MII and RMII
- Commercial temperature range [0°C to +70°C]
- Industrial temperature range (-40°C to +85°C)
Applications
- - Set-Top Boxes - Networked Printers and Servers - Test Instrumentation - LAN on Motherboard - Embedded Telecom Applications - Video Record/Playback Systems - Cable Modems/Routers - DSL Modems/Routers - Digital Video Recorders - IP and Video Phones - Wireless Access Points - Digital Televisions - Digital Media Adapters/Servers - Gaming Consoles - POE Applications (Refer to Microchip Application Note 17.18)
Datasheet
Alternative Parts
Common LAN8740A-EN alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 5A991B1 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing LAN8740A-EN from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for LAN8740A-EN, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Looking to source LAN8740A-EN? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.