Microchip Technology

LAN8710AI-EZK-TR

Drivers, Receivers, Transceivers

MPN
LAN8710AI-EZK-TR
Package / Case
QFN-32-EP(5x5)
Key Attributes
Small Footprint MI1/RMI1 10/100 Ethernet Transceiver

Technical Specifications

TypeDescription
InterfaceMII;RMII
Ethernet Speed Standards10BASE-T;100BASE-TX
Number of Channels-
TypePHY Transceiver
Supply Voltage1.6V~3.6V
TypeDescription
Data Rate10Mbit/s;100Mbit/s
Operating Temperature-40°C~+85°C
FeaturesLow-power mode;Power-on reset;Programmable LED indication
Package / CaseQFN-32-EP(5x5)

Product Introduction

The LAN8710A/LAN8710Ai is a low-power 10BASE-T/100BASE-TX physical layer (PHY) transceiver with variable I/O voltage that is compliant with the IEEE 802.3-2005 standards.

The LAN8710A/LAN8710Ai supports communication with an Ethernet MAC via a standard MII (IEEE 802.3u)/RMII interface. It contains a full-duplex 10-BASE-T/100BASE-TX transceiver and supports 10Mbps (10BASE-T) and 100Mbps (100BASE-TX) operation. The LAN8710A/LAN8710Ai implements auto-negotiation to automatically determine the best possible speed and duplex mode of operation. HP Auto-MDIX support allows the use of direct connect or cross-over LAN cables.

The LAN8710A/LAN8710Ai supports both IEEE 802.3-2005 compliant and vendor-specific register functions. However, no register access is required for operation. The initial configuration may be selected via the configuration pins as described in Section 3.7, "Configuration Straps," on page 29. Register-selectable configuration options may be used to further define the functionality of the transceiver.

Per IEEE 802.3-2005 standards, all digital interface pins are tolerant to 3.6V. The device can be configured to operate on a single 3.3V supply utilizing an integrated 3.3V to 1.2V linear regulator. The linear regulator may be optionally disabled, allowing usage of a high efficiency external regulator for lower system power dissipation.

The LAN8710A/LAN8710Ai is available in both extended commercial and industrial temperature range versions.

Features

  • Single-Chip Ethernet Physical Layer Transceiver (PHY)
  • Comprehensive flexPWR Technology - Flexible Power Management Architecture - LVCMOS Variable voltage range: +1.6V to +3.6V - Integrated 1.2V regulator with disable feature
  • HP Auto-MDIX support
  • Small footprint 32-pin QFN/SQFN lead-free RoHS compliant packages (5×5mm)
  • High-Performance 10/100 Ethernet Transceiver - Compliant with IEEE802.3/802.3u (Fast Ethernet) - Compliant with ISO 802-3/IEEE 802.3 (10BASE-T) - Loop-back modes - Auto-negotiation - Automatic polarity detection and correction - Link status change wake-up detection - Vendor specific register functions Supports both MII and the reduced pin count RMII interfaces
  • Power and I/Os - Various low power modes - Integrated power-on reset circuit - Two status LED outputs - Latch-Up Performance Exceeds 150mA per EIA/JESD 78, Class II - May be used with a single 3.3V supply
  • Additional Features - Ability to use a low cost 25Mhz crystal for reduced BOM
  • Packaging - 32-pin QFN/SQFN (5×5mm) Lead-Free RoHS Compliant package with MII and RMII
  • Environmental - Extended commercial temperature range (0°C to +85°C) - Industrial temperature range version available (-40°C to +85°C)

Applications

  • Set-Top Boxes
  • Networked Printers and Servers
  • Test Instrumentation
  • LAN on Motherboard
  • Embedded Telecom Applications
  • Video Record/Playback Systems
  • Cable Modems/Routers
  • DSL Modems/Routers
  • Digital Video Recorders
  • IP and Video Phones
  • Wireless Access Points
  • Digital Televisions
  • Digital Media Adapters/Servers
  • Gaming Consoles
  • POE Applications (Refer to Application Note 17.18)

Datasheet

📄 Open Download

Alternative Parts

Common LAN8710AI-EZK-TR alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCN5A991B1
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Sourcing LAN8710AI-EZK-TR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

When you need LAN8710AI-EZK-TR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Looking to source LAN8710AI-EZK-TR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.