LAN7800-I/VSX
Controllers
Technical Specifications
| Type | Description |
|---|---|
| Package / Case | SQFN-48 |
Product Introduction
The LAN7800 is a high performance SuperSpeed USB 3.1 Gen 1 to 10/100/1000 Ethernet controller with an integrated 10/100/1000 Ethernet PHY. With applications ranging from notebook/tablet docking stations, set-top boxes, and PVRs, to USB port replicators, USB to Ethernet dongles, embedded systems, and test
Features
- Single Chip SuperSpeed (SS) USB 3.1 Gen 1 to 10/100/1000 Ethernet Controller - Integrated Gigabit PHY with HP Auto-MDIX - Integrated 10/100/1000 Ethernet MAC (Full-Duplex Support) - Integrated USB 3.1 Gen 1 SS Device Controller and PHY
- Low Power Consumption - Compliant with Energy Efficient Ethernet IEEE 802.3az - Wake on LAN support (WoL)
- Configuration via One Time Programmable (OTP) Memory
- NetDetach provides automatic USB attach/detach when Ethernet cable is connected/removed
- USB 3.1 Gen 1 Device Controller - Supports SS (5 Gbps), HS (480 Mbps), and FS (12 Mbps) modes - Four endpoints supported - Supports vendor specific commands - Remote wakeup supported
- 10/100/1000 Ethernet Controller - Compliant with IEEE802.3/802.3u/802.3ab/802.3az - 10BASE-T/100BASE-TX/1000BASE-T support - Full- and half-duplex capability (only full-duplex operation at 1000 Mbps) - Controller Modes - Microsoft AOAC support (Always On Always Connected) - Supports Microsoft NDIS 6.2 large send offload - Full-duplex flow control - Loop-back modes - Supports IEEE 802.1q VLAN tagging - VLAN tag based packet filtering (all 4096 tags) - Flexible address filtering modes - 33 exact matches (unicast or multicast) - 512-bit hash filter for multicast frames - Pass all multicast - Promiscuous unicast/multicast modes - Inverse filtering - Pass all incoming with status report - Supports various statistical counters - PME pin support - Integrated Ethernet PHY - Auto-negotiation - Automatic polarity detection and correction - Link status change wake-up detection - Low EMI drivers with integrated line side termination resistor - Frame Features - Supports 32 wake-up frame patterns - Preamble generation and removal - Automatic 32-bit CRC generation and checking - 9 KB jumbo frame support - Automatic payload padding and pad removal - Supports Rx/Tx checksum offloads (IPv4, IPv6, TCP, UDP, IGMP, ICMP) - Ability to add and strip IEEE 802.1q VLAN tags
Applications
- - Automotive Infotainment - Notebook/Tablet Docking Stations - Detachable Laptops - USB Port Replicators - Standalone USB to Ethernet Dongles - Embedded Systems / CE Devices - Set-Top Boxes / Video Recorders - Test Instrumentation / Industrial
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 5A991B1 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing LAN7800-I/VSX from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
When you need LAN7800-I/VSX, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Ready to source LAN7800-I/VSX? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.