Microchip Technology

KSZ8863RLLI-TR

Controllers

MPN
KSZ8863RLLI-TR
Product Type
Package / Case
LQFP-48(7x7)
Key Attributes
Integrated 3-Port 10/100 Managed Switch with PHYs

Technical Specifications

TypeDescription
Supply Voltage3.3 V
MAC InterfaceRMII
Ethernet Speed Standards10BASE-T;100BASE-TX
Channels3
FeaturesCable diagnostics;Programmable LED indication;Low-power mode
TypeDescription
Operating Temperature-40°C~+85°C
Type-
Data Rate10Mbit/s;100Mbit/s
Package / CaseLQFP-48(7x7)

Product Introduction

KSZ8863MLL, KSZ8863FLL, and KSZ8863RLL are highly integrated 3-port switch-on-a-chip ICs in the industry’s smallest footprint. They are designed to enable a new generation of low port count, cost-sensitive, and power-efficient 10/ 100 Mb

Features

  • Advanced Switch Features
  • IEEE 802.1q VLAN Support for Up to 16 Groups (Full Range of VLAN IDs)
  • VLAN ID Tag/Untag Options, Per Port Basis
  • IEEE 802.1p/q Tag Insertion or Removal on a Per Port Basis (Egress)
  • Programmable Rate Limiting at the Ingress and Egress on a Per Port Basis
  • Broadcast Storm Protection with Percent Control (Global and Per Port Basis)
  • IEEE 802.1d Rapid Spanning Tree Protocol Support
  • Tail Tag Mode (1 byte Added before FCS) Support at Port 3 to Inform the Processor which Ingress Port Receives the Packet and its Priority
  • Bypass Feature that Automatically Sustains the Switch Function between Port 1 and Port 2 when CPU (Port 3 Interface) Goes to the Sleep Mode
  • Self-Address Filtering
  • Individual MAC Address for Port 1 and Port 2
  • Supports RMII Interface and 50 MHz Reference Clock Output
  • IGMP Snooping (IPv4) Support for Multicast Packet Filtering
  • IPv4/IPv6 QoS Support
  • MAC Filtering Function to Forward Unknown Unicast Packets to Specified Port
  • Comprehensive Configuration Register Access
  • Serial Management Interface (SMI) to All Internal Registers
  • MII Management (MIIM) Interface to PHY Registers
  • High Speed SPI and I²C Interface to All Internal Registers
  • I/O Pins Strapping and EEPROM to Program Selective Registers in Unmanaged Switch Mode
  • Control Registers Configurable on the Fly (PortPriority, 802.1p/d/q, AN…)
  • QoS/CoS Packet Prioritization Support
  • Per Port, 802.1p and DiffServ-Based
  • Re-Mapping of 802.1p Priority Field Per Port basis, Four Priority Levels
  • Proven Integrated 3-Port 10/100 Ethernet Switch
  • 3rd Generation Switch with Three MACs and Two PHYs Fully Compliant with IEEE 802.3u Standard
  • Non-Blocking Switch Fabric Ensures Fast Packet Delivery by Utilizing a 1k MAC Address Lookup Table and a Store-and-Forward Architecture
  • Full-Duplex IEEE 802.3x Flow Control (PAUSE) with Force Mode Option
  • Half-Duplex Back Pressure Flow Control
  • HP Auto MDI-X for Reliable Detection of and Correction for Straight-Through and Crossover Cables with Disable and Enable Option
  • LinkMD TDR-Based Cable Diagnostics Permit Identification of Faulty Copper Cabling
  • MII Interface Supports Both MAC Mode and PHY Mode
  • Comprehensive LED Indicator Support for Link, Activity, Full-/Half-Duplex and 10/100 Speed
  • HBM ESD Rating 4 kV
  • Switch Monitoring Features
  • Port Mirroring/Monitoring/Sniffing: Ingress and/ or Egress Traffic to Any Port or MII
  • MIB Counters for Fully Compliant Statistics Gathering 34 MIB Counters Per Port
  • Loopback Modes for Remote Diagnostic of Failure
  • Low Power Dissipation
  • Full-Chip Software Power-Down (Register Configuration Not Saved)
  • Energy-Detect Mode Support
  • Dynamic Clock Tree Shutdown Feature
  • Per Port Based Software Power-Save on PHY (Idle Link Detection, Register Configuration Preserved)
  • Voltages: Single 3.3V Supply with Internal 1.8V LDO for 3.3V VDDIO
  • Optional 3.3V, 2.5V, and 1.8V for VDDIO
  • Transceiver Power 3.3V for VDDA_3.3
  • Industrial Temperature Range: -40°C to +85°C
  • Available in a 48-Pin LQFP, Lead-Free Package

Applications

  • VoIP Phone
  • Set-Top/Game Box
  • Automotive
  • Industrial Control
  • IPTV POF
  • SOHO Residential Gateway
  • Broadband Gateway/Firewall/VPN
  • Integrated DSL/Cable Modem
  • Wireless LAN Access Point + Gateway
  • Standalone 10/100 Switch

Datasheet

📄 Open Download

Alternative Parts

Common KSZ8863RLLI-TR alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCN5A991B1
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Looking for a reliable source for KSZ8863RLLI-TR from Microchip Technology? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

When you need KSZ8863RLLI-TR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.

Need KSZ8863RLLI-TR? Send us your required quantity and specifications for a sourcing check and quotation.