KLMAG1JETD-B041
Memory
Technical Specifications
| Type | Description |
|---|---|
| Interface | eMMC 5.1 |
| Memory Size | 16GB |
| Reading Speed in Sequence | 330MB/S |
| Writing Speed in Sequence | 50MB/S |
| NAND Flash Type | - |
| NAND Stand-By Current | - |
| Type | Description |
|---|---|
| Controller Stand-By Current | - |
| NAND Operating Voltage (VCCF) | 2.7V~3.6V |
| Controller Operating Voltage (VCCQ) | 1.7V~1.95V;2.7V~3.6V |
| Operating Temp | -25°C ~ +85°C |
| Features | Built-in wear leveling function;Bad block management function;ECC error correction function;Secure write protection function;Hardware reset function |
| Package / Case | FBGA-153 |
Product Introduction
SAMSUNG eMMC is an embedded MMC solution designed in a BGA package form. eMMC operation is identical to a MMC device and therefore is a simple read and write to memory using MMC protocol v5.1 which is a industry standard.
eMMC consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (VDDF or VCC) whereas 1.8V or 3V dual supply voltage (VDD or VCCQ) is supported for the MMC controller. SAMSUNG eMMC supports HS400 in order to improve sequential bandwidth, especially sequential read performance.
There are several advantages of using eMMC. It is easy to use as the MMC interface allows easy integration with any microprocessor with MMC host. Any revision or amendment of NAND is invisible to the host as the embedded MMC controller insulates NAND technology from the host. This leads to faster product development as well as faster times to market.
The embedded flash management software or FTL(Flash Transition Layer) of eMMC manages Wear Leveling, Bad Block Management and ECC. The FTL supports all features of the Samsung NAND flash and achieves optimal performance.
Features
- embedded MultiMediaCard Ver. 5.1 compatible.
- SAMSUNG eMMC supports features of eMMC5.1 which are defined in JEDEC Standard
- Supported Features : Packed command, Cache, Discard, Sanitize, Power Off Notification, Data Tag, Partition types, Context ID, Real Time Clock, Dynamic Device Capacity, Command Queuing, Enhanced Strobe Mode, Secure Write Protection, HS200, HS400, Field Firmware Update.
- Non-supported Features : Large Sector Size (4KB)
- Full backward compatibility with previous MultiMediaCard system specification (1bit data bus, multi-eMMC system)
- Data bus width : 1bit (Default), 4bit and 8bit
- Temperature : Operation (-25℃ ~ 85℃), Storage without operation (-40℃ ~ 85℃)
- Interface power -> VDD(VCCQ) (1.70V ~ 1.95V or 2.7V ~ 3.6V), Memory power -> VDDF(VCC) (2.7V ~ 3.6V)
Datasheet
Alternative Parts
Common KLMAG1JETD-B041 alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS |
| ECCN | 3A991b1a |
| CNHTS | 8542329000 |
| USHTS | 8542320071 |
| TARIC | 8542329000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423299 |
| INHTS | 85423200 |
| MXHTS | 8542.32.99 |
Sourcing Information
Need KLMAG1JETD-B041 from Samsung Electronics for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for KLMAG1JETD-B041, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source KLMAG1JETD-B041? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.