KLM4G1FETE-B041
Memory
Technical Specifications
| Type | Description |
|---|---|
| Operating Temperature | -25°C~+85°C |
| Features | Built-in wear leveling function;Bad block management function;ECC error correction function;Hardware reset function;Secure write protection function |
| Interface | eMMC 5.1 |
| Memory Size | 4GB |
| Reading Speed in Sequence | 300MB/S |
| Type | Description |
|---|---|
| Writing Speed in Sequence | 19MB/S |
| NAND Flash Type | SLC |
| NAND Operating Voltage (VCCF) | 2.7V~3.6V |
| Controller Operating Voltage (VCCQ) | 1.7V~1.95V;2.7V~3.6V |
| Package / Case | FBGA-153(10x11) |
Product Introduction
SAMSUNG eMMC is an embedded MMC solution designed in a BGA package form. eMMC operation is identical to a MMC device and therefore is a simple read and write to memory using MMC protocol v5.1 which is a industry standard.
eMMC consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (V_DDF or V_CC) whereas 1.8V or 3V dual supply voltage (V_DD or V_CCQ) is supported for the MMC controller. SAMSUNG eMMC supports HS400 in order to improve sequential bandwidth, especially sequential read performance.
There are several advantages of using eMMC. It is easy to use as the MMC interface allows easy integration with any microprocessor with MMC host. Any revision or amendment of NAND is invisible to the host as the embedded MMC controller insulates NAND technology from the host. This leads to faster product development as well as faster times to market.
The embedded flash management software or FTL(Flash Transition Layer) of eMMC manages Wear Leveling, Bad Block Management and ECC. The FTL supports all features of the Samsung NAND flash and achieves optimal performance.
Features
- embedded MultiMediaCard Ver. 5.1 compatible.
- SAMSUNG eMMC supports features of eMMC5.1 which are defined in JEDEC Standard
- Major Supported Features : HS400, Field Firmware Update, Cache, Command Queuing, Enhanced Strobe Mode, Secure Write Protection, Partition types.
- Non-supported Features : Large Sector Size (4KB)
- Backward compatibility with previous MultiMediaCard system specification (1bit data bus, multi-eMMC system
- Data bus width : 1bit (Default), 4bit and 8bit
- MMC I/F Clock Frequency : 0 ~ 200MHz MMC I/F Boot Frequency : 0 ~ 52MHz
- Temperature : Operation (-25℃~85℃), Storage without operation (-40℃~85℃)
- Power : Interface power -> V_CCQ(1.70V~1.95V or 2.7V~3.6V), Memory power -> V_CC(2.7V~3.6V)
Datasheet
Alternative Parts
Common KLM4G1FETE-B041 alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS |
| CNHTS | 8542329000 |
| USHTS | 8542320071 |
| TARIC | 8542329000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423299 |
| INHTS | 85423200 |
| MXHTS | 8542.32.99 |
Sourcing Information
Looking for a reliable source for KLM4G1FETE-B041 from Samsung Electronics? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
For KLM4G1FETE-B041, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source KLM4G1FETE-B041? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.