Texas Instruments

INA210AIDCKR

Instrumentation, Op Amps, Buffer Amps

Manufacturer
MPN
INA210AIDCKR
Package / Case
SC-70-6
Key Attributes
Voltage Output, Low- or High-Side Measurement, Bidirectional, Zero-Drift Series, Current-Shunt Monitors

Technical Specifications

TypeDescription
Iq A6.5e-05
Vcm - Common Mode Voltage-300mV~26V
Ib - Input Bias Current15uA
-3dB Bandwidth14kHz
Differential Voltage+/-26V
Output Current-
Channels1.0
Voffset V550 V
Slew Rate Vus0.4
TypeDescription
Operating Temp-40°C ~ +125°C
Common Mode Rejection Ratio140.0
Voffset Drift Uv0.5
Gain Db200.0
FeaturesHigh-side detection;Low-side detection;Bidirectional detection;Zero drift / auto-zero;Input filter;Enable/shutdown function;Programmable output reference level
Noise Nv25.0
Dual Supply-
Single Supply-
Package / CaseSC-70-6

Product Introduction

The INA21x are voltage-output, current-shunt monitors (also called current-sense amplifiers) that are commonly used for overcurrent protection, precision-current measurement for system optimization, or in closed-loop feedback circuits. This series of devices can sense drops across shunts at common-mode voltages from –0.3 V to 26 V, independent of the supply voltage. Six fixed gains are available: 50 V/V, 75 V/V, 100 V/V, 200 V/V, 500 V/V, or 1000 V/V. The low offset of the zero-drift architecture enables current sensing with maximum drops across the shunt as low as 10 mV full-scale.

These devices operate from a single 2.7-V to 26-V power supply, drawing a maximum of 100 μA of supply current. All versions are specified over the extended operating temperature range (-40°C to +125°C), and offered in SC70 and UQFN packages.

Features

  • Wide Common-Mode Range: -0.3 V to 26 V
  • Offset Voltage: ±35 μV (Maximum, INA210) (Enables Shunt Drops of 10 mV Full-Scale)
  • Gain Error (Maximum Over Temperature): – ±0.5% (Version C) – ±1% (Versions A and B)
  • 0.5-μV/°C Offset Drift (Maximum)
  • 10-ppm/°C Gain Drift (Maximum)
  • Choice of Gains: INA210: 200 V/V; INA211: 500 V/V; INA212: 1000 V/V; INA213: 50 V/V; INA214: 100 V/V; INA215: 75 V/V
  • Quiescent Current: 100 μA (Maximum)
  • SC70 and Thin UQFN Packages: All Models

Applications

  • - Notebook Computers - Cell Phones - Telecom Equipment - Power Management Battery Chargers

Datasheet

📄 Open Download

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542339000
USHTS8542330001
TARIC8542339000
TypeDetails
CAHTS8542330000
BRHTS85423390
INHTS85423300
MXHTS8542.33.99

Sourcing Information

Looking for a reliable source for INA210AIDCKR from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for INA210AIDCKR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Looking to source INA210AIDCKR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.