INA180A2IDBVR
Instrumentation, Op Amps, Buffer Amps
Technical Specifications
| Type | Description |
|---|---|
| Iq A | 0 A |
| Vcm - Common Mode Voltage | -200mV~26V |
| Ib - Input Bias Current | 100nA |
| -3dB Bandwidth | 210kHz |
| Differential Voltage | +/-26V |
| Output Current | 0.008 A |
| Channels | 1.0 |
| Voffset V | 25 V |
| Slew Rate Vus | 2.0 |
| Type | Description |
|---|---|
| Operating Temp | -40°C ~ +125°C |
| Common Mode Rejection Ratio | 100.0 |
| Voffset Drift Uv | 1.0 |
| Gain Db | 50.0 |
| Features | High-side detection;Low-side detection;Analog output interface;Enable/shutdown function |
| Noise Nv | 40.0 |
| Dual Supply | - |
| Single Supply | 2.7V~5.5V |
| Package / Case | SOT-23-5 |
Product Introduction
The INA180, INA2180, and INA4180 (INAx180) current sense amplifiers are designed for cost-optimized applications. These devices are part of a family of current-sense amplifiers (also called current-shunt monitors) that sense voltage drops across current-sense resistors at common-mode voltages from -0.2 V to +26 V, independent of the supply voltage. The INAx180 integrate a matched resistor gain network in four, fixed-gain device options: 20 V/V, 50 V/V, 100 V/V, or 200 V/V. This matched gain resistor network minimizes gain error and reduces the temperature drift.
All these devices operate from a single 2.7-V to 5.5-V power supply. The single-channel INA180 draws a maximum supply current of 260 μA; whereas, the dual-channel INA2180 draws a maximum supply current of 500 μA, and the quad channel draws a maximum supply current of 900 μA.
The INA180 is available in a 5-pin, SOT-23 package with two different pin configurations. The INA2180 is available in an 8-pin VSSOP package. The INA4180 is available in a 14-pin TSSOP package. All device options are specified over the extended operating temperature range of -40°C to +125°C.
Features
- Common-Mode Range (VCM): -0.2 V to +26 V
- High Bandwidth: 350 kHz (A1 Devices)
- Offset Voltage: ±150 μV (Max) at VCM = 0 V; ±500 μV (Max) at VCM = 12 V
- Accuracy:
- ±1% Gain Error (Max)
- 1-μV/°C Offset Drift (Max)
- Gain Options:
- 20 V/V (A1 Devices)
- 50 V/V (A2 Devices)
- 100 V/V (A3 Devices)
- 200 V/V (A4 Devices)
- Quiescent Current: 260 μA Max (INA180)
Applications
- - Motor Control - Battery Monitoring - Power Management - Lighting Control - Overcurrent Detection - Solar Inverters
Datasheet
Alternative Parts
Common INA180A2IDBVR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
Sourcing Information
Looking for a reliable source for INA180A2IDBVR from Texas Instruments? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
When you need INA180A2IDBVR, SZ Procure can look into supplier options, confirm current availability, compare sourcing quotes and handle purchasing, pre-shipment inspection and consolidated shipment from Shenzhen.
Looking to source INA180A2IDBVR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.