HT8712R-30A
Magnetic Sensors
Technical Specifications
| Type | Description |
|---|---|
| Standby Current | - |
| Current Range | ±30A |
| Current Terminal Resistance | 1.2mOhm |
| Band Width | 80kHz |
| Response Time (tr) | 3.5us |
| Sensitivity | 66mV/A |
| Type | Description |
|---|---|
| Bidirectional Current Detection | Support |
| Supply Voltage | 5 V |
| Operating Temperature | -40°C~+125°C |
| Features | Bidirectional detection |
| Package / Case | SOP-8 |
Product Introduction
The HTCSEMI HT8712 provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, switch- mode power supplies, and overcurrent fault protection. The device is not intended for automotive applications.
The device consists of a precise, low- offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low- offset, chopper- stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.
the device at up to 5 × overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 5 through 8). This allows the HT8712 to be used in applications requiring electrical isolation without the use of opto- isolators or other costly isolation techniques.
The HT8712 is provided in a small, surface mount SOIC8 package. The leadframe is plated with 100% matte tin, which is compatible with standard lead(Pb) freeprintedcircuitboard assembly processes. Internally, the device is Pb- free, except for flip- chip high- temperature Pb- based solder balls, currently exempt from RoHS. The device is fully calibrated prior to shipment from the factory.
Features
- Low- noise analog signal path
- Device bandwidth is set via the new FILTER pin
- 5μs output rise time in response to step input current
- 80 kHz bandwidth
- Total output error 1.5% at TA = 25°C
- Small footprint, low- profile SOIC8 package
- 1.2 mΩ internal conductor resistance
- 2.4 kVRMS minimum isolation voltage from pins 1 - 4 to pins 5 - 8
- 5.0 V, single supply operation
- 66 to 185 mV/A output sensitivity
- Output voltage proportional to AC or DC currents
- Factory- trimmed for accuracy
- Extremely stable output offset voltage
- Nearly zero magnetic hysteresis
- Ratiometric output from supply voltage
Applications
- motor control
- load detection and management
- switch- mode power supplies
- overcurrent fault protection
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| CNHTS | 9030899090 |
| USHTS | 9030890100 |
| TARIC | 9030890000 |
| CAHTS | 9030890090 |
| Type | Details |
|---|---|
| BRHTS | 90308990 |
| INHTS | 90308990 |
| MXHTS | 9030.89.99 |
Sourcing Information
Looking for a reliable source for HT8712R-30A from HTCSEMI? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.
For HT8712R-30A, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source HT8712R-30A? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.