GD25Q16ETIGR
Memory
Technical Specifications
| Type | Description |
|---|---|
| Maximum Clock Speed | 133 MHz |
| Memory Size | 16Mbit |
| Program / Erase Cycles | 100,000 cycles |
| Data Retention - TDR (Year) | 20 Years |
| Block Erase Time(tBE) | 150ms@(32KB) |
| Write Cycle Time(tWC) | - |
| Page Programming Time (Tpp) | 400us |
| Type | Description |
|---|---|
| Standby Supply Current | 11uA |
| Operating Temperature | -40°C~+85°C |
| Features | Write enable latch;Hardware write protection;Software write protection;Absolute write protection |
| Supply Voltage | 2.7V~3.6V |
| Interface | SPI |
| Package / Case | SOP-8 |
Product Introduction
The GD25Q16E (16M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), I/O3 (HOLD#). The Dual I/O data is transferred with speed of 266Mbit/s, and the Quad I/O data is transferred with speed of 532Mbit/s.
Features
- 16M-bit Serial Flash
- 2048K-Byte
- 256 Bytes per programmable page
- Standard, Dual, Quad SPI
- Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#
- Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD#
- Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3
- High Speed Clock Frequency
- 133MHz for fast read with 30PF load
- Dual I/O Data transfer up to 266Mbits/s
- Quad I/O Data transfer up to 532Mbits/s
- Software/Hardware Write Protection
- Write protect all/portion of memory via software
- Enable/Disable protection with WP# Pin
- Top/Bottom Block protection
- Endurance and Data Retention
- Minimum 100,000 Program/Erase Cycles
- 20-year data retention typical
- Allows XiP (eXecute in Place) Operation
- High speed Read reduce overall XiP instruction fetch time
- Continuous Read with Wrap further reduce data latency to fill up SoC cache
- Fast Program/Erase Speed
- Page Program time: 0.4ms typical
- Sector Erase time: 45ms typical
- Block Erase time: 0.15s/0.25s typical
- Chip Erase time: 6s typical
- Flexible Architecture
- Uniform Sector of 4K-Byte
- Uniform Block of 32/64K-Byte
- Low Power Consumption
- 11μA typical standby current
- 1μA typical deep power down current
- Advanced Security Features
- 128-bit Unique ID for each device
- Serial Flash Discoverable parameters (SFDP) register
- 2x1024-Byte Security Registers With OTP Locks
- Single Power Supply Voltage
- Full voltage range: 2.7-3.6V
- Package Information
- SOP8 150mil
- SOP8 208mil
- USON8 (3x2mm, 0.45mm thickness)
- USON8 (3x4mm)
- USON8 (4x4mm, 0.45mm thickness)
- WSON8 (6x5mm)
Datasheet
Alternative Parts
Common GD25Q16ETIGR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542329000 |
| USHTS | 8542320071 |
| TARIC | 8542329000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423299 |
| INHTS | 85423200 |
| MXHTS | 8542.32.99 |
Sourcing Information
Need GD25Q16ETIGR from GigaDevice Semicon Beijing for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for GD25Q16ETIGR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source GD25Q16ETIGR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.