FT4232HQ-REEL
Controllers
Manufacturer
MPN
FT4232HQ-REEL
Product Type
Package / Case
QFN-64-EP
Datasheet
Key Attributes
USB to Multipurpose UART/MPSSE IC
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.3 V |
| Data Rate | 480000000 |
| Applications Function | USB to UART |
| USB Protocol | USB 2.0 |
| Current - Supply | - |
| Type | Description |
|---|---|
| Features | Hardware flow control support;Programmable baud rate;Power-on reset;Wake-up function;Built-in clock generator |
| Operating Temp | -40°C ~ +85°C |
| Iq A | - |
| Channels | 4.0 |
| Package / Case | QFN-64-EP |
Product Introduction
The FT4232H is a USB 2.0 High Speed (480Mb/s) to UART/MPSSE ICs. The device features 4 UARTs. Two of these have an option to independently configure an MPSSE engine. This allows the FT4232H to operate as two UART/Bit-Bang ports plus two MPSSE engines used to emulate JTAG, SPI, I²C, Bit-bang or other synchronous serial modes.
Features
- Single chip USB to quad serial ports with a variety of configurations.
- Entire USB protocol handled on the chip. No USB specific firmware programming required.
- USB 2.0 High Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.
- Two Multi-Protocol Synchronous Serial Engine (MPSSE) on channel A and channel B, to simplify synchronous serial protocol (USB to JTAG, I²C, SPI or bit-bang) design.
- Independent Baud rate generators.
- RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).
- FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
- Optional traffic TX/RX indicators can be added with LEDs and an external 74HC595 shift register.
- Adjustable receive buffer timeout.
- Support for USB suspend and resume conditions via PWREN#, SUSPEND# and RI# pins.
- Highly integrated design includes +1.8V LDO regulator for VCORE, integrated POR function and on chip clock multiplier PLL (12MHz – 480MHz).
- FTDI FT232B style, asynchronous serial UART interface option with full hardware handshaking and modem interface signals.
- Fully assisted hardware or X-On / X-Off software handshaking.
- UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity.
- Auto-transmit enable control for RS485 serial applications using TXDEN pin.
- Operational configuration mode and USB Description strings configurable in external EEPROM over the USB interface.
- Low operating and USB suspend current.
- Configurable I/O drive strength (4, 8, 12 or 16mA) and slew rate.
- Supports bus powered, self-powered and highpower bus powered USB configurations.
- UHCI/OHCI/EHCI host controller compatible.
- USB Bulk data transfer mode (512 byte packets in High Speed mode).
- Dedicated Windows DLLs available for USB to JTAG, USB to SPI, and USB to I²C applications.
- +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant).
- Extended -40°C to 85°C industrial operating temperature range.
- Compact 64-LD Lead Free LQFP or QFN package Available in compact Pb-free 56 Pin VQFN packages (RoHS compliant)
- +3.3V single supply operating voltage range.
- ESD protection for FT4232H IO’s: Human Body Model (HBM) ±2KV, Machine Mode (MM) ±200V, Charge Device Model (CDM) ±500V.
- Latch-up free.
Applications
- - Single chip USB to four channels UART (RS232, RS422 or RS485) or Bit-Bang interfaces. - Single chip USB to 2 JTAG channels plus 2 UARTS. - Single chip USB to 1 JTAG channel plus 3 UARTS. - Single chip USB to 1 SPI channel plus 3 UARTS. - Single chip USB to 2 SPI channels plus 2 UARTS. - Single chip USB to 2 Bit-Bang channels plus 2 UARTS. - Single chip USB to 1 SPI channel, plus 1 JTAG channel plus 2 UARTS. - Single chip USB to 2 I2C channels plus 2 UARTS. - Numerous combinations of 4 channels. - Upgrading Legacy Peripheral Designs to USB - Field Upgradable USB Products - Cellular and cordless phone USB data transfer cables and interfaces. - Interfacing MCU / PLD / FPGA based designs to USB - PDA to USB data transfer - USB Smart Card Readers - USB Instrumentation - USB Industrial Control - USB MP3 Player Interface - USB FLASH Card Reader / Writers - Set Top Box PC - USB interface - USB Digital Camera Interface - USB Bar Code Readers
Datasheet
Alternative Parts
Common FT4232HQ-REEL alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing FT4232HQ-REEL from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For FT4232HQ-REEL, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Looking to source FT4232HQ-REEL? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.