FTDI

FT232RNL-REEL

Controllers

Manufacturer
MPN
FT232RNL-REEL
Product Type
Package / Case
SSOP-28
Key Attributes
USB UART Interface

Technical Specifications

TypeDescription
Working Voltage V4.275 V
Iq A7e-05
Applications FunctionUSB to UART
USB ProtocolUSB 2.0
Current - Supply15mA
TypeDescription
FeaturesHardware flow control support;Programmable baud rate;Power-on reset;FIFO buffer;Built-in clock generator
Operating Temp-40°C ~ +85°C
Channels-
Data Rate-
Package / CaseSSOP-28

Product Introduction

The FT232RN is a USB to serial UART interface with the following advanced features:

Features

  • Single chip USB to asynchronous serial data transfer interface.
  • Entire USB protocol handled on the chip. No USB specific firmware programming required.
  • Fully integrated 1024-bit EEPROM storing device descriptors and CBUS I/O configuration.
  • Fully integrated USB termination resistors.
  • Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
  • Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels. 128 bytes receive buffer, and 256 bytes transmit buffer utilising buffer smoothing technology to allow for high data throughput. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
  • Unique USB FTDIChip-ID feature.
  • Configurable CBUS I/O pins.
  • Transmit and receive LED drive signals.
  • UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity FIFO receives and transmits buffers for high data throughput. Synchronous and asynchronous bit bang interface options with RD# and WR# strobes. Device supplied pre-programmed with unique USB serial number.
  • Supports bus powered, self-powered and highpower bus powered USB configurations.
  • Integrated +3.3V level converter for USB I/O.
  • Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic. True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.
  • Configurable I/O pin output drive strength.
  • Integrated power-on-reset circuit.
  • Fully integrated AVCC supply filtering - no external filtering required.
  • UART signal inversion option.
  • +3.3V to +5.25V Single Supply Operation.
  • Low operating and USB suspend current.
  • Low USB bandwidth consumption.
  • UHCI/OHCI/EHCI host controller compatible.
  • USB 2.0 Full Speed compatible.
  • 40°C to 85°C extended operating temperature range. Available in compact Pb-free 28 Pin SSOP and QFN-32 packages (both RoHS compliant).

Applications

  • - USB to RS232/RS422/RS485 Converters - Upgrading Legacy Peripherals to USB - Cellular and Cordless Phone USB data transfer cables and interfaces - Interfacing MCU/PLD/FPGA based designs to USB - USB Audio and Low Bandwidth Video data transfer - PDA to USB data transfer - USB Smart Card Readers - USB Instrumentation - USB Industrial Control - USB MP3 Player Interface - USB FLASH Card Reader and Writers - Set Top Box PC - USB interface - USB Digital Camera Interface - USB Hardware Modems - USB Wireless Modems - USB Bar Code Readers - USB Software and Hardware Encryption Dongles

Datasheet

📄 Open Download

Alternative Parts

Common FT232RNL-REEL alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS
ECCNEAR99
CNHTS8542399000
USHTS8542390001
TARIC8542399000
TypeDetails
CAHTS8542390000
BRHTS85423999
INHTS85423900
MXHTS8542.39.99

Sourcing Information

Sourcing FT232RNL-REEL from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

For FT232RNL-REEL, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.

Need FT232RNL-REEL? Send us your required quantity and specifications for a sourcing check and quotation.