FT230XS-R
Controllers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 4.15 V |
| Data Rate | 3000000 |
| Iq A | 0 A |
| Applications Function | USB to UART |
| USB Protocol | USB 2.0 |
| Type | Description |
|---|---|
| Current - Supply | 8mA |
| Features | Programmable baud rate;Power-on reset;FIFO buffer;Built-in clock generator;Hardware flow control support |
| Operating Temp | -40°C ~ +85°C |
| Channels | - |
| Package / Case | SSOP-16-150mil |
Product Introduction
The FT230X is a USB to serial UART interface with optimised pin count for smaller PCB designs and the following advanced features:
Single chip USB to asynchronous serial data transfer interface. Entire USB protocol handled on the chip. No USB specific firmware programming required. Fully integrated 2048 byte multi-timeprogrammable (MTP) memory, storing device descriptors and CBUS I/O configuration. Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA. Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, and RS232) at TTL levels. 512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to allow for high data throughput. FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
Configurable CBUS I/O pins.
Transmit and receive LED drive signals. UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity Synchronous and asynchronous bit bang interface options with RD# and WR# strobes. USB Battery Charger Detection. Allows for USB peripheral devices to detect the presence of a higher power source to enable improved charging. Device supplied pre-programmed with unique USB serial number. USB Power Configurations; supports bus-powered, self-powered and bus-powered with power switching
Integrated +3.3V level converter for USB I/O. True 3.3V CMOS drive output and TTL input; operates down to 1V8 with external pull ups. Tolerant of 5V input Configurable I/O pin output drive strength; 4 mA (min) and 16 mA (max).
Integrated power-on-reset circuit.
Fully integrated AVCC supply filtering - no external filtering required.
UART signal inversion option.
+ 5V Single Supply Operation.
Internal 3V3/1V8 LDO regulators
Low operating and USB suspend current; 8mA (active-typ) and 125uA (suspend-typ).
UHCI/OHCI/EHCI host controller compatible.
USB 2.0 Full Speed compatible.
Extended operating temperature range; -40 to 85°C. Available in compact Pb-free 16 pin SSOP and 16 pin QFN packages (both RoHS compliant).
Features
- Single chip USB to asynchronous serial data transfer interface
- Entire USB protocol handled on the chip
- No USB specific firmware programming required
- Fully integrated 2048 byte multi-timeprogrammable (MTP) memory
- Fully integrated clock generation with no external crystal required
- Optional clock output selection enabling a glue-less interface to external MCU or FPGA
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, and RS232) at TTL levels
- 512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology
- FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers
- Configurable CBUS I/O pins
- Transmit and receive LED drive signals
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity
- Synchronous and asynchronous bit bang interface options with RD# and WR# strobes
- USB Battery Charger Detection
- Device supplied pre-programmed with unique USB serial number
- USB Power Configurations; supports bus-powered, self-powered and bus-powered with power switching
- Integrated +3.3V level converter for USB I/O
- True 3.3V CMOS drive output and TTL input; operates down to 1V8 with external pull ups
- Tolerant of 5V input
- Configurable I/O pin output drive strength; 4 mA (min) and 16 mA (max)
- Integrated power-on-reset circuit
- Fully integrated AVCC supply filtering - no external filtering required
- UART signal inversion option
- + 5V Single Supply Operation
- Internal 3V3/1V8 LDO regulators
- Low operating and USB suspend current; 8mA (active-typ) and 125uA (suspend-typ)
- UHCI/OHCI/EHCI host controller compatible
- USB 2.0 Full Speed compatible
- Extended operating temperature range; -40 to 85°C
- Available in compact Pb-free 16 pin SSOP and 16 pin QFN packages (both RoHS compliant)
Applications
- - USB to RS232/RS422/RS485 Converters - Upgrading Legacy Peripherals to USB - Utilising USB to add system modularity - Incorporate USB interface to enable PC transfers for development system communication - Cellular and Cordless Phone USB data transfer cables and interfaces - Interfacing MCU/PLD/FPGA based designs to add USB connectivity - USB Audio and Low Bandwidth Video data transfer - USB Smart Card Readers - USB Instrumentation - USB Industrial Control - USB MP3 Player Interface - USB FLASH Card Reader and Writers - Set Top Box PC - USB interface - USB Digital Camera Interface - USB Hardware Modems - USB Wireless Modems - USB Bar Code Readers - USB dongle implementations for Software/Hardware Encryption and Wireless Modules - Detection of dedicated charging port for battery charging at higher supply currents.
Datasheet
Alternative Parts
Common FT230XS-R alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing FT230XS-R from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For FT230XS-R, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source FT230XS-R? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.