FSUSB42MUX
Analog Switches, Multiplexers, Demultiplexers
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 3.7 V |
| Turn-on time | 13ns |
| Turn-off time | 12ns |
| -3dB Bandwidth | 720MHz |
| Ron | 3.9Ohm |
| Propagation Delay (tpd) | 250ps |
| Type | Description |
|---|---|
| Switch Circuit | 2:1 |
| Con | 3.7pF |
| Channels | 2.0 |
| Operating Temp | -40°C ~ +85°C |
| Features | Fault protection;Bidirectional analog channel |
| Package / Case | MSOP-10 |
Product Introduction
The FSUSB42 is a bi-directional, low-power, two-port, Hi-Speed, USB2.0 switch. Configured as a double-pole, double-throw switch (DPDT) switch, it is optimized for switching between two Hi-Speed (480Mbps) sources or a Hi-Speed and Full-Speed (12Mbps) source.
The FSUSB42 is compatible with the requirements of USB2.0 and features an extremely low on capacitance (C₀ₙ) of 3.7pF. The wide bandwidth of this device (720MHz) exceeds the bandwidth needed to pass the third harmonic, resulting in signals with minimum edge and phase distortion. Superior channel-to-channel crosstalk also minimizes interference.
The FSUSB42 contains special circuitry on the switch I/O pins for applications where the VCC supply is powered-off (VCC = 0), which allows the device to withstand an over-voltage condition. This device is designed to minimize current consumption even when the control voltage applied to the SEL pin is lower than the supply voltage (VCC). This feature is especially valuable to ultra-portable applications, such as cell phones, allowing for direct interface with the general-purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, PDAs, digital cameras, printers, and notebook computers.
Features
- Low On Capacitance: 3.7pF Typical
- Low On Resistance: 3.9Ω Typical
- Low Power Consumption: 1μA Maximum - 15μA Maximum ICCT over an Expanded Voltage Range (V₁ₙ = 1.8V, VCC = 4.4V)
- Wide -3db Bandwidth: >720MHz
- Packaged in:
- 10-Lead UMLP (1.4×1.8mm)
- 10-Lead MSOP
- 8kV ESD Rating, >16kV Power/GND ESD Rating
- Over-Voltage Tolerance (OVT) on all USB Ports Up to 5.25V without External Components
Applications
- - Cell phone, PDA, Digital Camera, and Notebook - LCD Monitor, TV, and Set-Top Box
Datasheet
Alternative Parts
Common FSUSB42MUX alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing FSUSB42MUX from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For FSUSB42MUX, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need FSUSB42MUX? Send us your required quantity and specifications for a sourcing check and quotation.