NXP Semiconductors

FS32K146HAT0MLQT

Microcontrollers

Manufacturer
MPN
FS32K146HAT0MLQT
Product Type
Core Processor
ARM Cortex-M4F
Maximum Clock Speed
80 MHz
Package / Case
LQFP-144(20x20)
Key Attributes
Low-power microcontroller with Arm Cortex-M4F/M0+ core

Technical Specifications

TypeDescription
Core ProcessorARM Cortex-M4F
Core Size32 bit
Maximum Clock Speed80 MHz
Program Storage Size1 MB
Number of I/O128
Flash TypeFLASH
ADC (Bit)12 bit
TypeDescription
Oscillator TypeBuilt-in
EEPROM4 KB
DAC (Bit)8 bit
Operating Temperature-40°C~+125°C
Supply Voltage2.7V~5.5V
Package / CaseLQFP-144(20x20)

Features

  • Operating characteristics
  • Voltage range: 2.7 V to 5.5 V
  • Ambient temperature range: -40 °C to 105 °C for HSRUN mode, -40 °C to 150 °C for RUN mode
  • Arm Cortex-M4F/M0+ core, 32-bit CPU
  • Supports up to 112 MHz frequency (HSRUN mode) with 1.25 Dhrystone MIPS per MHz
  • Arm Core based on the Armv7 Architecture and Thumb-2 ISA
  • Integrated Digital Signal Processor (DSP)
  • Configurable Nested Vectored Interrupt Controller (NVIC)
  • Single Precision Floating Point Unit (FPU)
  • Clock interfaces
  • 4 - 40 MHz fast external oscillator (SOSC) with up to 50 MHz DC external square input clock in external clock mode
  • 48 MHz Fast Internal RC oscillator (FIRC)
  • 8 MHz Slow Internal RC oscillator (SIRC)
  • 128 kHz Low Power Oscillator (LPO)
  • Up to 112 MHz (HSRUN) System Phased Lock Loop (SPLL)
  • Up to 20 MHz TCLK and 25 MHz SWD_CLK
  • 32 kHz Real Time Counter external clock (RTC_CLKIN)
  • Power management
  • Low-power Arm Cortex-M4F/M0+ core with excellent energy efficiency
  • Power Management Controller (PMC) with multiple power modes: HSRUN, RUN, STOP, VLPR, and VLPS
  • Memory and memory interfaces
  • Up to 2 MB program flash memory with ECC
  • 64 KB FlexNVM for data flash memory with ECC and EEPROM emulation
  • Up to 256 KB SRAM with ECC
  • Up to 4 KB of FlexRAM for use as SRAM or EEPROM emulation
  • Up to 4 KB Code cache to minimize performance impact of memory access latencies
  • QuadSPI with HyperBus support
  • Mixed-signal analog
  • Up to two 12-bit Analog-to-Digital Converter (ADC) with up to 32 channel analog inputs per module
  • One Analog Comparator (CMP) with internal 8-bit Digital to Analog Converter (DAC)
  • Debug functionality
  • Serial Wire JTAG Debug Port (SWJ-DP) combines
  • Debug Watchpoint and Trace (DWT)
  • Instrumentation Trace Macrocell (ITM)
  • Test Port Interface Unit (TPIU)
  • Flash Patch and Breakpoint (FPB) Unit
  • Human-machine interface (HMI)
  • Up to 156 GPIO pins with interrupt functionality
  • Non-Maskable Interrupt (NMI)
  • Communications interfaces
  • Up to three Low Power Universal Asynchronous Receiver/Transmitter (LPUART/LIN) modules with DMA support and low power availability
  • Up to three Low Power Serial Peripheral Interface (LPSPI) modules with DMA support and low power availability
  • Up to two Low Power Inter-Integrated Circuit (LPI2C) modules with DMA support and low power availability
  • Up to three FlexCAN modules (with optional CAN-FD support)
  • FlexIO module for emulation of communication protocols and peripherals (UART, I2C, SPI, I2S, LIN, PWM, etc)
  • Up to one 10/100Mbps Ethernet with IEEE1588 support and two Synchronous Audio Interface (SAI) modules
  • Safety and Security
  • Cryptographic Services Engine (CSEc) implements a comprehensive set of cryptographic functions as described in the SHE (Secure Hardware Extension) Functional Specification
  • 128-bit Unique Identification (ID) number
  • Error-Correcting Code (ECC) on flash and SRAM memories
  • System Memory Protection Unit (System MPU)
  • Cyclic Redundancy Check (CRC) module
  • Internal watchdog (WDOG)
  • External Watchdog monitor (EWM) module
  • Timing and control
  • Up to eight independent 16-bit FlexTimers (FTM) modules, offering up to 64 standard channels (IC/OC/PWM)
  • One 16-bit Low Power Timer (LPTMR) with flexible wake up control
  • Two Programmable Delay Blocks (PDB) with flexible trigger system
  • One 32-bit Low Power Interrupt Timer (LPIT) with 4 channels
  • 32-bit Real Time Counter (RTC)
  • Package
  • 32-pin QFN, 48-pin LQFP, 64-pin LQFP, 100-pin LQFP, 100-pin MAPBGA, 144-pin LQFP, 176-pin LQFP packag options
  • 16 channel DMA with up to 63 request sources using DMAMUX

Datasheet

📄 Open Download

Inline preview not available

This datasheet is hosted by the manufacturer, who does not allow it to be embedded. Open the official PDF on www.nxp.com:

Open on www.nxp.com

Alternative Parts

Common FS32K146HAT0MLQT alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCN5A992C
TypeDetails
CNHTS8542319090

Sourcing Information

Looking for a reliable source for FS32K146HAT0MLQT from NXP Semiconductors? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

For FS32K146HAT0MLQT, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.

Looking to source FS32K146HAT0MLQT? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.