DSPIC33FJ32GS406-I/PT

Technical Specifications

Product Introduction

Features

• Code-Efficient (C and Assembly) Architecture
• Two 40-Bit Wide Accumulators
• Single-Cycle (MAC/MPY) with Dual Data Fetch
• Single-Cycle Mixed-Sign MUL plus Hardware Divide
• 32-Bit Multiply Support
• ±1% Internal Oscillator
• Programmable PLLs and Oscillator Clock Sources
• Fail-Safe Clock Monitor (FSCM)
• Independent Watchdog Timer (WDT)
• Fast Wake-up and Start-up
• Low-Power Management modes (Sleep, Idle, Doze)
• Integrated Power-on Reset and Brown-out Reset
• 1.7 mA/MHz Dynamic Current (typical)
• 50 μA IPD Current (typical)
• Up to 9 PWM Pairs with Independent Timing
• Dead Time for Rising and Falling Edges
• 1.04 ns PWM Resolution
• Programmable Fault Inputs
• Flexible Trigger Configurations for ADC Conversions
• High-Speed ADC module: 10-bit resolution with up to two Successive Approximation Register (SAR) converters (up to 4 Msps), Up to 24 input channels grouped into 12 conversion pairs plus two voltage reference monitoring inputs, Dedicated result buffer for each analog channel
• Flexible and Independent ADC Trigger Sources
• Up to 4 High-Speed Comparators with Direct Connection to the PWM module: 10-bit Digital-to-Analog Converter (DAC) for each comparator, DAC reference output, Programmable references with 1024 voltage points
• Six General Purpose Timers: Five 16-bit and up to two 32-bit timers/counters
• Four Output Compare (OC) modules Configurable as Timers/Counters
• Quadrature Encoder Interface (QEI) module Configurable as Timer/Counter
• Four Input Capture (IC) modules
• Two UART modules (12.5 Mbps): With support for LIN/J2602 2.0 protocols and IrDA
• Two 4-Wire SPI modules (15 Mbps)
• ECAN module (1 Mbaud) with ECAN 2.0B Support
• Two I²C modules (up to 1 Mbaud) with SMBus Support
• 4-Channel DMA with User-Selectable Priority Arbitration
• Sink/Source 18 mA on 18 Pins, 10 mA on 1 Pin or 6 mA on 66 Pins
• 5V Tolerant Pins
• Selectable Open-Drain and Pull-ups
• 29 External Interrupts
• AEC-Q100 REVG (Grade 1, -40℃ to +125℃)
• Class B Safety Library, IEC 60730, VDE Certified
• In-Circuit and In-Application Programming
• Two Program and Two Complex Data Breakpoints
• IEEE 1149.2 Compatible (JTAG) Boundary Scan
• Trace and Run-Time Watch

Applications

• - DC/DC, AC/DC, Inverters, PFC, Lighting - BLDC, PMSM, ACIM, SRM

Datasheet

Compliance & Export Codes