Kingston

D5116AN9CXGXN-U

Memory

Manufacturer
MPN
D5116AN9CXGXN-U
Product Type
Maximum Clock Speed
1.6 GHz
Package / Case
FBGA-96

Technical Specifications

TypeDescription
Maximum Clock Speed1.6 GHz
Refresh Current-
Memory Size8Gbit
Memory FormatDDR4 SDRAM
TypeDescription
Operating Temp0°C ~ +95°C
FeaturesAuto self-refresh;Data mask function;CRC function;Dynamic on-chip termination;Asynchronous reset function;ZQ calibration function;Write leveling function
Working Voltage V1.2 V
Package / CaseFBGA-96

Product Introduction

Kingston on-board DDR4 DRAM is designed to meet the needs of embedded applications and offers a high speed option with lower power consumption.

Features

  • Double-data-rate architecture: two data transfers per clock cycle
  • The high-speed data transfer is realized by the 8 bits prefetch pipelined architecture
  • Bi-directional differential data strobe (DQS and /DQS) is transmitted/received with data for capturing data at the receiver
  • DQS is edge-aligned with data for READs; center-aligned with data for WRITEs
  • Differential clock inputs (CK_t and CK_c)
  • DLL aligns DQ and DQS transitions with CK transitions
  • Data mask (DM) write data-in at the both rising and falling edges of the data strobe
  • Write Cycle Redundancy Code (CRC) is supported
  • Programmable preamble for read and write is supported
  • Programmable burst length 4/8 with both nibble sequential and interleave mode
  • BL switch on the fly
  • Driver strength selected by MRS
  • Dynamic On Die Termination supported
  • Two Termination States such as RTT_PARK and RTT_NOM switchable by ODT pin
  • Asynchronous RESET pin supported
  • ZQ calibration supported
  • Write Levelization supported
  • This product in compliance with the RoHS directive
  • Internal Vref DQ level generation is available
  • TCAR (Temperature Controlled Auto Refresh) mode is supported
  • LP ASR (Low Power Auto Self Refresh) mode is supported
  • Command Address (CA) Parity (command/address) mode is supported
  • Per DRAM Addressability (PDA)
  • Fine granularity refresh is supported
  • Geardown Mode(1/2 rate, 1/4 rate) is supported
  • Self Refresh Abort is supported
  • Maximum power saving mode is supported
  • Banks Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or different bank group accesses are available
  • DMI pin support for write data masking and DBIdc functionality

Applications

  • - Industrial IoT / Robotics & Factory Automation - 5G Networking/Telecommunications Communication Modules (WiFi Routers and Mesh Devices) - Office Equipment, Medical Devices, ATM, Vending Machines - Smart Home (Sound Bars, Thermostats, Fitness Equipment, Vacuums, Beds, Faucets) - Smart City (HVAC, Lighting, Power Monitoring/ Metering, Parking Meters)

Datasheet

📄 Open Download

Alternative Parts

Common D5116AN9CXGXN-U alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS8542329000
USHTS8542320071
TARIC8542329000
TypeDetails
CAHTS8542330000
BRHTS85423299
INHTS85423200
MXHTS8542.32.99

Sourcing Information

Looking for a reliable source for D5116AN9CXGXN-U from Kingston? SZ Procure is a China electronics sourcing partner, helping international buyers source components through our supplier network in Shenzhen.

For D5116AN9CXGXN-U, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.

Need D5116AN9CXGXN-U? Send us your required quantity and specifications for a sourcing check and quotation.