CT431-HSWF40MR
Magnetic Sensors
Technical Specifications
| Type | Description |
|---|---|
| Standby Current | 6mA |
| Current Range | ±40A |
| Band Width | 1MHz |
| Current Terminal Resistance | 0.5mOhm |
| Response Time (tr) | 300ns |
| Sensitivity | 25mV/A |
| Type | Description |
|---|---|
| Bidirectional Current Detection | Support |
| Supply Voltage | 3.3 V |
| Operating Temperature | -40°C~+125°C |
| Features | Overcurrent Protection;Under-voltage lockout;TMR technology;Bidirectional detection |
| Package / Case | SOIC-16 |
Product Introduction
The CT431 is a high bandwidth and ultra- low noise integrated contact current sensor that uses Allegro patented XtremeSense™ TMR technology to enable high accuracy current measurements for many consumer, enterprise, and industrial applications. The device supports nine current ranges where the integrated current carrying conductor (CCC) will handle up to 65A of current and generates a current measurement as a linear analog output voltage. The device achieves a total output error of less than ±1.0% full- scale (FS) over voltage and the full temperature range.
The device has a ~300 ns output response time while the current consumption is ~6.0mA and is immune to common mode fields. The CT431 has an integrated overcurrent detection (OCD) circuitry to identify out of range currents (OCD) with the result output to the fault- bar (FLT) pin. The FLT is an open drain, active low digital signal that is activated by the CT431 to alert the microcontroller that a fault condition has occurred.
The CT431 is offered in an industry- standard 16- lead SOIC wide package that is green and RoHS compliant.
Features
- Integrated contact current sensing for low to medium current ranges: 0 to 20A, ±30A, ±50A, ±20A, ±40A, 0 to 65A, 0 to 30A, 0 to 50A, ±65A
- Integrated current carrying conductor (CCC)
- Linear analog output voltage
- Total error output ≤ ±1.0% FS, -40℃ to 125℃
- 1 MHz bandwidth
- Response time: ~300 ns
- UL/IEC 62368-1 and UL1577 certification
- Rated isolation voltage: 5kV_RMS
- Working voltage for basic isolation: 1287V_RMS
- Working voltage for reinforced isolation: 647V_RMS
- IEC 61000-4-5 certified
- Low noise: 9.5 to 19.0mA_RMS @ f_BW = 100kHz
- Reference voltage output for AC/DC current measurements
- V_OUT - V_REF < ±1.0% FS, -40℃ to 125℃
- Immunity to common mode fields: -54 dB
- Supply voltage: 3.0 to 3.6V
- Overcurrent detection: Out of range currents
- AEC-Q100 grade 1
Applications
- Solar/power inverters
- UPS, SMPS, and telecom power supplies
- Battery management systems
- Motor control
- White goods
- Power utility meter
- Overcurrent fault protection
Datasheet
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 9030899090 |
| USHTS | 9030890100 |
| TARIC | 9030890000 |
| Type | Details |
|---|---|
| CAHTS | 9030890090 |
| BRHTS | 90308990 |
| INHTS | 90308990 |
| MXHTS | 9030.89.99 |
Sourcing Information
Sourcing CT431-HSWF40MR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for CT431-HSWF40MR, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Need CT431-HSWF40MR? Send us your required quantity and specifications for a sourcing check and quotation.