CDM4644IY
Power Modules
Number of Outputs: 4
Quiescent Supply Current: 15mA;5mA
Features: Programmable output voltage;Power-on timing control;External clock synchronization;Overvoltage protection;Over Current Protection;Over-temperature protection;Under Voltage Protection
Voltage - Supply: 4V~14V
Output Voltage: 600mV~5.5V
Height: 5.01mm
Output Voltage Accuracy: ±1.5%
Operating Temperature Range: -40℃~+125℃
Ripple Noise: 20mVp-p
Output Current(Max): 16A
Length: 15mm
Width: 9mm
Switching Frequency: 1MHz
Technical Specifications
| Type | Description |
|---|---|
| Function | Step-down type |
| Channels | 4 |
| Quiescent Current | 10 mA |
| Height | 5.01mm |
| Switching Frequency | 1MHz |
| Ripple Noise | 20mVp-p |
| Capacitive Load(Max) | - |
| Output Current(Max) | 16A |
| Conversion Efficiency | - |
| Type | Description |
|---|---|
| Operating Temperature Range | -40°C~+125°C |
| Length | 15mm |
| Width | 9mm |
| Output Voltage Accuracy | ±1.5% |
| Features | Programmable output voltage;Power-on timing control;External clock synchronization;Overvoltage protection;Over Current Protection;Over-temperature protection;Under Voltage Protection |
| Type | - |
| Supply Voltage | 4V~14V |
| Output Voltage | 600mV~5.5V |
| Package / Case | BGA-77 |
Product Introduction
The CDM4644 is a standalone quad-channel 4A step-down DC/DC micro-module power supply. It supports multiple outputs or parallel array outputs, with a maximum output current of 16A.
The module integrates a switching controller, power FETs, inductors, high-precision upper voltage divider resistors (0.1%), and supporting components. Only a small number of external filter/hold capacitors and resistors are required to form a complete step-down quad-output DC/DC voltage regulator.
The module input voltage range is 4V to 14V, and the output voltage can be set between 0.6V and 5.5V via an external sense resistor.
The module supports external frequency synchronization, continuous/discontinuous mode, and output voltage tracking sequencing operation. It features built-in temperature monitoring, over-temperature, over-voltage, and over-current protection.
Features
- Quad-channel 4A step-down micro module
- Wide input voltage range: 4V～14V, external bias supply down to 2.4V
- Output voltage range: 0.6V～5.5V
- 4A rated output per channel, 5A peak
- Up to 5.5W power dissipation without heatsink (TA = 60°C, 200LFM)
- ±1.5% total output voltage regulation
- Current mode control for fast transient response
- Parallel multi-channel operation for higher output current
- Output voltage tracking
- Internal/external temperature sensing with synchronous diode output
- OVP, OCP, and OTP
Applications
- Multi-rail point-of-load regulation for FPGA, DSP, and ASIC applications
Datasheet
Sourcing Information
Need CDM4644IY from Shenzhen CYT Semicon Tech for your next order? SZ Procure provides local sourcing support in Shenzhen — we help buyers check supplier availability, compare quotations, and coordinate procurement for China-sourced components.
Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for CDM4644IY, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.
Ready to source CDM4644IY? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.