CC1310F128RHBR
RF Transceiver ICs
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 2.8 V |
| Adc Bits | 12.0 |
| Flash Memory | 128 KB |
| Core Processor | ARM Cortex-M3 |
| Type | Description |
|---|---|
| Core Bits | 32.0 |
| Operating Temp | -40°C ~ +85°C |
| Package / Case | VQFN-32-EP |
Product Introduction
The CC1310 is a member of the CC26xx and CC13xx family of cost-effective, ultra-low-power, 2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current consumption, in addition to flexible low-power modes, provide excellent battery lifetime and allow long-range operation on small coin-cell batteries and in energy-harvesting applications.
The CC1310 device is the first device in a Sub-1 GHz family of cost-effective, ultra-low-power wireless MCUs. The CC1310 device combines a flexible, very low power RF transceiver with a powerful 48-MHz Cortex®-M3 microcontroller in a platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power and flexibility. The low-power consumption of the CC1310 device does not come at the expense of RF performance; the CC1310 device has excellent sensitivity and robustness (selectivity and blocking) performance.
The CC1310 device is a highly integrated, true single-chip solution incorporating a complete RF system and an on-chip DC-DC converter.
Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU that can be configured to handle analog and digital sensors; thus the main MCU (Cortex-M3) can maximize sleep time.
Features
- Microcontroller – Powerful ARM® Cortex®-M3 Processor – EEMBC CoreMark® Score: 142 – EEMBC ULPBench™ Score: 158 – Clock Speed up to 48-MHz – 32KB, 64KB, and 128KB of In-System Programmable Flash – 8KB of SRAM for Cache (or as General-Purpose RAM) – 20KB of Ultra-Low-Leakage SRAM – 2-Pin cJTAG and JTAG Debugging Supports Over-the-Air (OTA) Update
- Ultra-Low-Power Sensor Controller – Can Run Autonomously From the Rest of the System – 16-Bit Architecture – 2KB of Ultra-Low-Leakage SRAM for Code and Data
- Efficient Code-Size Architecture, Placing Parts of TI-RTOS, Drivers, and Bootloader in ROM
- RoHS-Compliant Package – 7mm×7mm RGZ VQFN48 (30 GPIOs) – 5mm×5mm RHB VQFN32 (15 GPIOs) – 4mm×4mm RSM VQFN32 (10 GPIOs)
- Peripherals – All Digital Peripheral Pins Can Be Routed to Any GPIO – Four General-Purpose Timer Modules (Eight 16-Bit or Four 32-Bit Timers, PWM Each) – 12-Bit ADC, 200 ksamples/s, 8-Channel Analog MUX – Continuous Time Comparator – Ultra-Low-Power Clocked Comparator – Programmable Current Source – UART – 2× SSI (SPI, MICROWIRE, TI) – I2C, I2S – Real-Time Clock (RTC) – AES-128 Security Module – True Random Number Generator (TRNG) – Support for Eight Capacitive Sensing Buttons – Integrated Temperature Sensor
- External System – On-Chip Internal DC-DC Converter – Seamless Integration With the SimpleLink™ CC1190 Range Extenders
- Low Power – Wide Supply Voltage Range: 1.8 to 3.8 V – RX: 5.4 mA – TX at +10 dBm: 13.4 mA – Active-Mode MCU 48 MHz Running Coremark: 2.5 mA (51 μA/MHz) – Active-Mode MCU: 48.5 CoreMark/mA – Active-Mode Sensor Controller at 24 MHz: 0.4 mA + 8.2 μA/MHz – Sensor Controller, One Wakeup Every Second Performing One 12-Bit ADC Sampling: 0.95 μA – Standby: 0.7 μA (RTC Running and RAM and CPU Retention) – Shutdown: 185 nA (Wakeup on External Events)
- RF Section – Excellent Receiver Sensitivity –124 dBm Using Long-Range Mode, –110 dBm at 50 kbps (Sub-1 GHz) – Excellent Selectivity (±100 kHz): 56 dB – Excellent Blocking Performance (±10 MHz): 90 dB – Programmable Output Power up to +15 dBm – Single-Ended or Differential RF Interface – Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations • ETSI EN 300 220, EN 303 204 (Europe) • FCC CFR47 Part 15 (US) • ARIB STD-T108 (Japan) – Wireless M-Bus and Selected IEEE® 802.15.4g PHY
- Tools and Development Environment – Full-Feature and Low-Cost Development Kits – Multiple Reference Designs for Different RF Configurations – Packet Sniffer PC Software – Sensor Controller Studio – SmartRF™ Studio – SmartRF Flash Programmer 2 – IAR Embedded Workbench for ARM – Code Composer Studio™
Applications
- - 315-, 433-, 470-, 500-, 779-, 868-, 915-, 920-MHz ISM and SRD Systems - Low-Power Wireless Systems With 50-kHz to 5-MHz Channel Spacing - Home and Building Automation - Wireless Alarm and Security Systems - Industrial Monitoring and Control - Smart Grid and Automatic Meter Reading - Wireless Healthcare Applications - Wireless Sensor Networks - Active RFID - IEEE 802.15.4g, IP-Enabled Smart Objects (6LoWPAN), Wireless M-Bus, KNX Systems, Wi-SUN , and Proprietary Systems - Energy-Harvesting Applications - Electronic Shelf Label (ESL) - Long-Range Sensor Applications - Heat-Cost Allocators
Datasheet
Alternative Parts
Common CC1310F128RHBR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 5A992C |
| Type | Details |
|---|---|
| CNHTS | 8542319090 |
Sourcing Information
Sourcing CC1310F128RHBR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For CC1310F128RHBR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Looking to source CC1310F128RHBR? Submit an RFQ and let our Shenzhen sourcing team check available supplier options for you.