CC1101RGPR
RF Transceiver ICs
Technical Specifications
| Type | Description |
|---|---|
| Working Voltage V | 2.7 V |
| Data Rate | 500000 |
| Sensitivity | -112dBm |
| Applications | ISM |
| Frequency Range | 300MHz~348MHz;387MHz~464MHz;779MHz~928MHz |
| Receive Current | 15.7mA |
| Interface Type | SPI |
| Type | Description |
|---|---|
| Current Of Transmitting | 34.2mA |
| Typical Application Frequency | 315MHz;433MHz;868MHz;915MHz |
| Output Power | 12dBm |
| Operating Temp | -40°C ~ +85°C |
| Features | Input sync word detection function;Supports RSSI function;CRC check function;Power-on reset function |
| Type | transceiver |
| Package / Case | QFN-20-EP |
Product Introduction
CC1101 is a low-cost sub-1 GHz transceiver designed for very low-power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868, and 915 MHz, but can easily be programmed for operation at other frequencies in the 300 - 348 MHz, 387 - 464 MHz and 779 - 928 MHz bands.
The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 600 kbps.
CC1101 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio.
The main operating parameters and the 64-byte transmit/receive FIFOs of CC1101 can be controlled via an SPI interface. In a typical system, the CC1101 will be used together with a microcontroller and a few additional passive components.
The CC1190 850 - 950 MHz range extender [21] can be used with CC1101 in long range applications for improved sensitivity and higher output power.
Features
- RF Performance
- High sensitivity
- 116 dBm at 0.6 kBaud, 433 MHz, 1% packet error rate
- 112 dBm at 1.2 kBaud, 868 MHz, 1% packet error rate
- Low current consumption (14.7 mA in RX, 1.2 kBaud, 868 MHz)
- Programmable output power up to +12 dBm for all supported frequencies
- Excellent receiver selectivity and blocking performance
- Programmable data rate from 0.6 to 600 kbps
- Frequency bands: 300 - 348 MHz, 387 - 464 MHz and 779 - 928 MHz
- Analog Features
- 2-FSK, 4-FSK, GFSK, and MSK supported as well as OOK and flexible ASK shaping
- Suitable for frequency hopping systems due to a fast settling frequency synthesizer; 75 μs settling time
- Automatic Frequency Compensation (AFC) can be used to align the frequency synthesizer to the received signal centre frequency
- Integrated analog temperature sensor
- Digital Features
- Flexible support for packet oriented systems; On-chip support for sync word detection, address check, flexible packet length, and automatic CRC handling
- Efficient SPI interface; All registers can be programmed with one “burst” transfer
- Digital RSSI output
- Programmable channel filter bandwidth
- Programmable Carrier Sense (CS) indicator
- Programmable Preamble Quality Indicator (PQI) for improved protection against false sync word detection in random noise
- Support for automatic Clear Channel Assessment (CCA) before transmitting (for listen-before-talk systems)
- Support for per-package Link Quality Indication (LQI)
- Optional automatic whitening and dewhitening of data
- Low-Power Features
- 200 nA sleep mode current consumption
- Fast startup time; 240 μs from sleep to RX or TX mode (measured on EM reference design [1] and [2])
- Wake-on-radio functionality for automatic low-power RX polling
- Separate 64-byte RX and TX data FIFOs (enables burst mode data transmission)
- General
- Few external components; Completely onchip frequency synthesizer, no external filters or RF switch needed
- Green package: RoHS compliant and no antimony or bromine
- Small size (QLP 4x4 mm package, 20 pins)
- Suited for systems targeting compliance with EN 300 220 (Europe) and FCC CFR Part 15 (US)
- Suited for systems targeting compliance with the Wireless MBUS standard EN 13757-4:2005
- Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility with existing radio communication protocols
- Improved Range using CC1190
- The CC1190 [21] is a range extender for 850 - 950 MHz and is an ideal fit for CC1101 to enhance RF performance
- High sensitivity
- 118 dBm at 1.2 kBaud, 868 MHz, 1% packet error rate
- 120 dBm at 1.2 kBaud, 915 MHz, 1% packet error rate
- +20 dBm output power at 868 MHz
- +27 dBm output power at 915 MHz
Applications
- - Ultra low-power wireless applications operating in the 315/433/868/915 MHz ISM/SRD bands - Wireless alarm and security systems - Industrial monitoring and control - Wireless sensor networks - AMR Automatic Meter Reading - Home and building automation - Wireless MBUS
Datasheet
Alternative Parts
Common CC1101RGPR alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | 5A991B |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Sourcing Information
Sourcing CC1101RGPR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For CC1101RGPR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Ready to source CC1101RGPR? Send your requirement through Request a Quote and we'll help check sourcing options and procurement costs.