BTS3800SLHTSA1
Power Management
Technical Specifications
| Type | Description |
|---|---|
| Number of Channels | 1 |
| Control Input Logic | Active High |
| Maximum Continuous Current | 350mA |
| Operating Temperature | -40°C~+150°C |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Latch protection;Reverse voltage protection |
| Type | Description |
|---|---|
| Rds On Ohm | 800mΩ |
| Supply Voltage | 2.7V~5.5V |
| Type | Low Side Switch |
| Package / Case | SCT-595-5 |
Product Introduction
The BTS3800SL is a single channel Low Side power switch with embedded protective functions in PG - SCT595 package. The device is monolithically integrated with a N channel power MOSFET and additional protection functions.
The BTS3800SL is especially designed as a protected relay driver in automotive and industrial applications.
The device is able to switch all kind of resistive, inductive and capacitive loads, limited by the available short-circuit energy (E_AS) and maximum current capabilities.
The BTS3800SL offers ESD protection on the IN Pin refering to the Source Pin (Ground).
The overtemperature protection prevents the device from overheating due to overload and/or bad cooling conditions. The temperature information is given by a temperature sensor which is placed monolitically in the power stage.
The BTS3800SL has a thermal latch function. The device will turn off and stay off, even after the measured temperature has dropped below the thermal hysteresis. After cooling down the device can be switched on again by toggling the IN pin.
The over voltage protection is active during load dump or inductive turn off conditions.
In this conditions the power stage is limiting the Drain to Source voltage at the maximum allowable drain-source voltage (V_DS(AZ)) and dissipating energy.
Features
- Short circuit and over load protection
- Thermal shutdown with latch behavior
- ESD protection
- Over voltage protection
- Logic level input suitable for 5V and 3.3V
- Small footprint automotive power package
- Green Product (RoHS compliant)
- AEC Qualified
Applications
- Designed for driving relays in automotive and industrial applications
- Protected power switch for small loads
- Protected line driver
- Protected supply switch
- Replacement of discrete circuits
Datasheet
Alternative Parts
Common BTS3800SLHTSA1 alternatives overseas buyers search for:
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 |
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Type | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
Sourcing Information
Sourcing BTS3800SLHTSA1 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.
For BTS3800SLHTSA1, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.
Need BTS3800SLHTSA1? Send us your required quantity and specifications for a sourcing check and quotation.