Bosch

BNO055

IMUs (Inertial Measurement Units)

Manufacturer
MPN
BNO055
Package / Case
LGA-28
Key Attributes
9-axis absolute direction sensor

Technical Specifications

TypeDescription
Output Bits14bit;16bit
Accelerometer Sensing AxisX,Y,Z
Cache Size-
TypeDescription
Standby Current40uA
Acceleration Measurement Range (MAX)+/-16g
Package / CaseLGA-28

Product Introduction

The BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit cortex M0+ microcontroller running Bosch Sensortec sensor fusion software, in a single package.

The corresponding chip-sets are integrated into one single 28-pin LGA 3.8mmx5.2mmx1.1mm housing. For optimum system integration the BNO055 is equipped with digital bidirectional I²C and UART interfaces. The I²C interface can be programmed to run with the HID-I2C protocol turning the BNO055 into a plug-and-play sensor hub solution for devices running the Windows 8.0 or 8.1 operating system.

Features

  • Outputs fused sensor data
  • 3 sensors in one device
  • Small package
  • Power Management
  • Common voltage supplies
  • Digital interface
  • Consumer electronics suite
  • Quaternion, Euler angles, Rotation vector, Linear acceleration, Gravity, Heading an advanced triaxial 16bit gyroscope, a versatile, leading edge triaxial 14bit accelerometer and a full performance geomagnetic sensor
  • LGA package 28 pins
  • Footprint 3.8x5.2mm², height 1.13mm²
  • Intelligent Power Management: normal, low power and suspend mode available
  • VDD voltage range: 2.4V to 3.6V
  • HID-I2C (Windows 8 compatible), I2C, UART
  • VDDio voltage range: 1.7V to 3.6V
  • MSL1, RoHS compliant, halogen-free
  • Operating temperature: -40℃ ... +85℃
  • Programmable functionality
  • Acceleration ranges ±2g / ±4g / ±8g / ±16g
  • Low-pass filter bandwidths 1kHz - <8Hz
  • On-chip interrupt controller
  • Motion-triggered interrupt-signal generation for any-motion (slope) detection, slow or no motion recognition, high-g detection
  • Programmable functionality
  • Ranges switchable from ±125°/s to ±2000°/s
  • Low-pass filter bandwidths 523Hz - 12Hz
  • On-chip interrupt controller
  • Motion-triggered interrupt-signal generation for any-motion (slope) detection high rate
  • Flexible functionality
  • Magnetic field range typical ±1300μT (x-, y-axis); ±2500μT (z-axis)
  • Magnetic field resolution of ~0.3μT

Applications

  • - Navigation - Robotics - Fitness and well-being - Augmented reality - Context awareness - Tablets and ultra-books

Datasheet

📄 Open Download

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
CNHTS9029900000
USHTS9029908080
TARIC9029900010
TypeDetails
CAHTS9029900000
BRHTS90299090
INHTS90299000
MXHTS9029.90.01

Sourcing Information

Sourcing BNO055 from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

Our Shenzhen sourcing team can help with supplier sourcing, availability checks and quotation comparison for BNO055, then coordinate procurement, supplier screening, inspection and international shipping based on what you need.

Need BNO055? Send us your required quantity and specifications for a sourcing check and quotation.