Microchip Technology

ATMEGA1284P-AUR

Microcontrollers

MPN
ATMEGA1284P-AUR
Product Type
Core Processor
AVR
Maximum Clock Speed
20 MHz
Package / Case
TQFP-44
Key Attributes
8-bit microcontrollers based on the AVR enhanced RISC architecture

Technical Specifications

TypeDescription
Core ProcessorAVR
Core Bits8
Maximum Clock Speed20 MHz
Flash Memory128 KB
Number of I/O32
Flash TypeFLASH
TypeDescription
Oscillator TypeBuilt-in
Eeprom Bytes4 KB
Operating Temp-40°C ~ +85°C
Working Voltage V3.65 V
Package / CaseTQFP-44

Product Introduction

The ATmega164A/PA/324A/PA/644A/PA/1284/P is a low power, CMOS 8-bit microcontrollers based on the AVR enhanced RISC architecture. The ATmega164A/PA/324A/PA/644A/PA/1284/P is a 40/49-pins device ranging from 16 KB to 128 KB Flash, with 1 KB to 16 KB SRAM, 512 Bytes to 4 KB EEPROM. By executing instructions in a single clock cycle, the devices achieve CPU throughput approaching one million instructions per second (MIPS) per megahertz, allowing the system designer to optimize power consumption versus processing speed.

Features

  • High-performance, low-power 8-bit AVR Microcontroller
  • Advanced RISC architecture
  • 131 powerful Instructions – most single-clock cycle execution
  • 2x8 general purpose working registers
  • Fully static operation Up to 20MIPS throughput at 20MHz
  • On-chip 2-cycle multiplier
  • High endurance non-volatile memory segments
  • 16/32/64/128KBytes of In-System Self-programmable Flash program memory
  • 512/1K/2K/4KBytes EEPROM
  • 1/2/4/16KBytes Internal SRAM
  • Write/Erase Cycles: 10,000 Flash/ 100,000 EEPROM
  • Data retention: 20 years at 85℃/ 100 years at 25℃
  • Optional Boot Code Section with Independent Lock Bits
  • In-System Programming by On-chip Boot Program
  • True Read-While-Write Operation
  • Programming Lock for Software Security
  • QTouch Library Support
  • Capacitive touch buttons, sliders and wheels
  • QTouch and QMatrix acquisition Up to 64 sense channels
  • JTAG (IEEE std. 1149.1 Compliant) Interface
  • Boundary-scan Capabilities According to the JTAG Standard
  • Extensive On-chip Debug Support
  • Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
  • Two 8-bit Timer/Counters with Separate Prescalers and Compare Modes
  • One/two 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
  • Real Time Counter with Separate Oscillator
  • Six PWM Channels
  • 8-channel, 10-bit ADC
  • Differential mode with selectable gain at x, 10x or 200x
  • Byte-oriented Two-wire Serial Interface
  • Two Programmable Serial USART
  • Master/Slave SPI Serial Interface
  • Programmable Watchdog Timer with Separate On-chip Oscillator
  • On-chip Analog Comparator
  • Interrupt and Wake-up on Pin Change
  • Power-on Reset and Programmable Brown-out Detection
  • Internal Calibrated RC Oscillator
  • External and Internal Interrupt Sources
  • Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby and Extended Standby
  • 32 Programmable I/O Lines
  • Operating Voltages 1.8 - 5.5V
  • Speed Grades: 0 - 4MHz @ 1.8 - 5.5V; 0 - 10MHz @ 2.7 - 5.5V; 0 - 20MHz @ 4.5 - 5.5V
  • Power Consumption at 1MHz, 1.8V, 25℃: Active: 0.4mA; Power-down Mode: 0.1μA; Power-save Mode: 0.6μA (Including 32kHz RTC)

Datasheet

📄 Open Download

Alternative Parts

Common ATMEGA1284P-AUR alternatives overseas buyers search for:

Compliance & Export Codes

TypeDetails
RoHSROHS3
ECCNEAR99
TypeDetails
CNHTS8542319090

Sourcing Information

Sourcing ATMEGA1284P-AUR from China? SZ Procure helps international buyers navigate the Shenzhen electronics market and locate suitable supplier options for specific component requirements.

For ATMEGA1284P-AUR, we can check current supplier availability, compare quotations from multiple sources, coordinate purchasing, and arrange pre-shipment inspection and shipment consolidation according to your requirements.

Need ATMEGA1284P-AUR? Send us your required quantity and specifications for a sourcing check and quotation.